Comparison ledger
Agilent 11980 A Fiber Optic, Varian 979 Leak Detector, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 11980 A Fiber OpticAgilent | 979 Leak DetectorVarian |
|---|---|---|
| OEM | Agilent | Varian |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Agilent 11980 A Fiber Optic | Varian 979 Leak Detector |
| Specifications | ||
| Configuration | 1250-1600nm[1] | — |
| Wavelength Range | 1250-1600nm[1] | — |
| Product type | — | Helium mass spectrometer leak detector[2] |
| Operating modes | — | Evacuation mode and sniffing mode[3] |
| Minimum detectable leak, standard sensitivity | — | 5 x 10-10 atm-cc/sec[3] |
| Minimum detectable leak, high sensitivity | — | 5 x 10-11 atm-cc/sec[3] |
| Configuration options | — | Bench/mount unit or single or dual mechanically pumped leak testing station on a cart[3] |
| Calibration | — | Fully automated tuning and calibration using the internal or external calibrated leak[4] |
| Leak indication | — | 50-segment bar graph indicator with alphanumeric LCD display[4] |
| Remote I/O | — | DB-37S interface with optically isolated 5-24 VDC outputs and inputs, non-isolated RS-232, non-isolated analog output 0-10 V, and non-isolated DB-9S remote control interface[4] |
| Cycle time | — | Blanked port can be cycled to the fine leak test in 4 seconds[4] |
| Test port | — | NW25; 118 inch (28 mm) ID compression port available as an accessory[4] |
| Power requirements | — | 100 VAC 20 A 50 Hz, 115 VAC 20 A 60 Hz, or 230 VAC 20 A 50/60 Hz[4] |
| Weight | — | 50 lb (23 kg) net stand-alone bench-mount unit; 180 lb (82 kg) net wet 1-pump version; 243 lb (111 kg) net wet 2-pump version[4] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →