Comparison ledger
Applied Materials 0041-26723 Bonded Assembly, Kulicke & Soffa 4523 Deep Wedge, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0041-26723 Bonded AssemblyApplied Materials | 4523 Deep WedgeKulicke & Soffa |
|---|---|---|
| OEM | Applied Materials | Kulicke & Soffa |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0041-26723 Bonded Assembly | Kulicke & Soffa 45xx |
| Specifications | ||
| Configuration | — | heated chuck[1] |
| OEM | — | Kulicke & Soffa[1] |
| Model | — | 4523 Deep Wedge[1] |
| Equipment type | — | Bonders[2] |
| Brand | — | Kulicke And Soffa[2] |
| Description | — | Vertical feed wedge bonder[2] |
| Included optics | — | Stereo zoom optics[2] |
| Ultrasonic generator | — | Ultrasonic generator[2] |
| Operating mode | — | Manual Z lever or semiauto mode[2] |
| Force control | — | Electronic force control[2] |
| Bonding materials | — | Aluminum wire, gold wire, and ribbon[3] |
| Applications | — | Simple discrete devices, complex hybrid devices, microwave devices, and deep cavity devices[3] |
| Deep access option | — | Deep access option with tail adjust system[3] |
| Bonding area | — | 134 x 134 mm (5.3 x 5.3 inch)[3] |
| Throat depth | — | 143 mm (5.6 inch)[3] |
| Gross table motion | — | 140 mm (5.5 inch)[3] |
| Fine table motion | — | 14 mm (0.55 inch)[3] |
| Mouse ratio | — | 6:1[3] |
| Z motion system | — | DC servo / LVDT control[3] |
| Z travel low reset | — | 6.6 mm (260 mil)[3] |
| Z travel high reset | — | 12.7 mm (500 mil)[3] |
| Ultrasonic system | — | High Q 60 kHz transducer with PLL ultrasonic generator[3] |
| Low ultrasonic power | — | 1.3 W[3] |
| High ultrasonic power | — | 2.5 W[3] |
| Bond time | — | 10-100 mSec / 10-1000 mSec[3] |
| Bond force | — | Force coil 10-160 gr.[3] |
| Wire termination | — | Clamp tear[3] |
| Wire feed angle | — | 30/45 option 90[3] |
| Modes of operation | — | Semi-Auto, Manual, Stitch[3] |
| Temperature controller | — | Up to 250 ±0.5 C[3] |
| Electrical requirements | — | 100-120/220-240V 10% 50/60 Hz 250VA max.[3] |
| Physical dimensions | — | 680 mm (27") W x 700 mm (27.5") D x 530 mm (21") H[3] |
| Shipping weight | — | 55 kg (122 lb)[3] |
| Net weight | — | 31 kg (69 lb)[3] |
| Standards | — | Complies with UL and CE standards[3] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →