Comparison ledger
ASM Siplace SX, Juki KE 3010 AL Placement, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Siplace SXASM | |
|---|---|---|
| OEM | ASM | Juki |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | ASM Siplace | Juki KE 3010 AL Placement |
| Cited variants | — | |
| Specifications | ||
| Configuration | Feeders not included[3] | w/ (2) Feeder Trolleys[1] |
| Pressure | 5-10 bar[4] | — |
| Full Load Current | 15/Ph A[3] | — |
| Type | Pick-and-place machine[4] | placement system[6] |
| Make | ASM[4] | Juki[6] |
| Model | Siplace SX[4] | KE 3010 AL[6] |
| Power | 50/60 Hz[4] | — |
| Supply voltage | 120/208 V[4] | — |
| PnP head part number | CP20[4] | — |
| Software | STATION version 713.1[4] | — |
| Vision software | Vision @127.0.0.1 572.5.0[4] | — |
| Operation hours | 92353[4] | — |
| Component count | 40373702[4] | — |
| Camera | Camera for CP head (type 34 & 41)[3] | — |
| Head type | CP20A[4] | — |
| Changeover table | 1[3] | — |
| Feeder carts | 2 feeder carts / 60 slots ea[4] | — |
| Nozzle changer | 8 noz changer with nozzles (4 front / 4 rear)[3] | — |
| Vintage | 2012[4] | 2020[1] |
| Placement speed SX1 | 43,250 cph[5] | — |
| Placement speed SX2 | 86,500 cph[5] | — |
| Placement accuracy | +/- 25µ @ 3σ[5] | — |
| PCB dimensions, single-track conveyor | up to 450 mm x 560 mm[5] | — |
| PCB dimensions, dual-track conveyor | up to 450 mm x 265 mm[5] | — |
| Long board option | up to 1525 mm x 560 mm[5] | — |
| Feeder capacity | up to 120 x 8 mm feeder[5] | — |
| Machine dimensions | 1,5 m × 2,475 m × 1,45 m (L x W x H)[5] | — |
| M2M communication interfaces | IPC-HERMES-9852, WORKS Operations Information Broker, IPC-CFX[5] | — |
| Category | Assembly / SMT[4] | Assembly / SMT[6] |
| Optics | Camera for CP head (type 34 & 41)[4] | — |
| Placement heads | CP20, CPP, TWIN or TH head options[4] | — |
| Change over table | 1[4] | — |
| Dual head & conveyor | present[4] | — |
| Conveyor | — | L Size Conveyor (14" x 16")[6] |
| Head | — | (1) Multi-Nozzle Laser Head w/ (6) Nozzles[1] |
| Board handling | — | Board Edge Clamping System[6] |
| Feeder trolleys | — | 2[6] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →