Comparison ledger
Heller 1707 EXL Reflow Soldering, Juki RS 1 XL, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | RS 1 XLJuki | |
|---|---|---|
| OEM | Heller | Juki |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Juki RS 1 XL |
| Specifications | ||
| Make | Heller[1] | — |
| Model | 1707 EXL[1] | — |
| Machine type | Reflow soldering machine / reflow soldering oven[1] | Pick and place machine / Fast Smart Modular Mounter[3] |
| Vintage | 2005[1] | — |
| Power input | Standard 208/240 VAC 3-phase[2] | — |
| Breaker size | 100 amps @ 480 V[2] | — |
| Optional power inputs | 380/400/440/415/480 VAC[2] | — |
| Frequency | 50/60 Hz[2] | — |
| Overall length | 134 in (340 cm)[2] | — |
| Overall width | 54 in (137 cm)[2] | — |
| Overall height | 63 in (160 cm)[2] | — |
| Typical net weight | 3000 lbs (1360 kg)[2] | — |
| Operating system | Windows XP[2] | — |
| Top heating zones | 7[2] | — |
| Bottom heating zones | 7[2] | — |
| Cooling zones | 1[2] | — |
| Heater type | Instant response open coil[2] | — |
| Heater material | Nichrome[2] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[2] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[2] | — |
| Phase | — | 3 Phase[3] |
| Voltage | — | 208 V[3] |
| Board size | — | 50×50 mm to 650×560 mm[4] |
| Component height | — | 25 mm[4] |
| Component size | — | 0201 to □74 mm / 150×50 mm[4] |
| Placement speed | — | 42,000 CPH (Optimum), 29,000 CPH (IPC9850)[4] |
| Placement accuracy | — | ±35 μm (Cpk≧1)[4] |
| Feeder inputs | — | Max. 112[4] |
| Power supply | — | AC200 to 415V, 3-phases[4] |
| Apparent power | — | 22 kVA[4] |
| Operating air pressure | — | 0.5±0.05 MPa[4] |
| Air consumption | — | 200 L/min[4] |
| Machine dimensions (W×D×H) | — | 2,109×2,000×1,440 mm[4] |
| Mass | — | 1,850 kg[4] |
| Recognition system | — | 10 / 27 / 54 mm view camera[5] |
| Inspection function | — | Coplanarity sensor / Component Verification System (CVS)[5] |
| Control/software | — | JaNets / IFS-NX / Flexline CAD[5] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →