Comparison ledger
Heller 1707 EXL Reflow Soldering, MPM UP 3000, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | UP 3000MPM | |
|---|---|---|
| OEM | Heller | MPM |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | MPM UP 3000 |
| Specifications | ||
| Make | Heller[1] | — |
| Model | 1707 EXL[1] | — |
| Machine type | Reflow soldering machine / reflow soldering oven[1] | — |
| Vintage | 2005[1] | 2011[3] |
| Power input | Standard 208/240 VAC 3-phase[2] | — |
| Breaker size | 100 amps @ 480 V[2] | — |
| Optional power inputs | 380/400/440/415/480 VAC[2] | — |
| Frequency | 50/60 Hz[2] | — |
| Overall length | 134 in (340 cm)[2] | — |
| Overall width | 54 in (137 cm)[2] | — |
| Overall height | 63 in (160 cm)[2] | — |
| Typical net weight | 3000 lbs (1360 kg)[2] | — |
| Operating system | Windows XP[2] | — |
| Top heating zones | 7[2] | — |
| Bottom heating zones | 7[2] | — |
| Cooling zones | 1[2] | — |
| Heater type | Instant response open coil[2] | — |
| Heater material | Nichrome[2] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[2] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[2] | — |
| Printer Dimension (W x D x H) | — | 63.0 in (1600.2 mm) wide, 89.0 in (2260.0 mm) deep, 10.0 in (1524 mm + 254 mm) high[4] |
| Conveyor Length | — | 63.0 in (1600.2 mm)[4] |
| Approximate Shipping Weight | — | 3,400 lb (1542.24 kg)[4] |
| Pneumatic Requirements | — | 90 psi @ 10 cfm (1323 bar at 283.2 L/min)[4] |
| Squeegee Speed | — | 0.25 in/sec to 12 in/sec (6.35 mm/sec x 305 mm/sec)[4] |
| Fiducial Method | — | 2 to 5 models standard fiducials or pads[4] |
| Fiducial Size | — | 0.02 in (0.5 mm to 3 mm)[4] |
| Camera System | — | MPM unique high speed linear drive system[4] |
| Board Size (Max) | — | 22 in.[4] |
| Blade Sizes Available | — | 8, 10, 12, 14, 16, 18, 20, 22, 24 inch lengths[5] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →