Comparison ledger
Leica DM2700 and Leica MZ75, side by side. Every value shown is drawn from its cited encyclopedia entry.
| Attribute | DM2700Leica | MZ75Leica |
|---|---|---|
| OEM | Leica | Leica |
| Category | Metrology & Inspection | Metrology & Inspection |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Leica DM2700 | Leica MZ75 |
| Cited variants | — | |
| Specifications | ||
| Model | DM2700[2] | Leica MZ75[6] |
| OEM | Leica[2] | — |
| Equipment type | Upright Materials Microscope / Optical Microscope[2] | — |
| Location | SEEL 181E[2] | Z07[6] |
| Operating modes | Transmission and reflecting modes[2] | — |
| Illumination | White light LED illumination[2] | — |
| Imaging modes | Bright field and dark field observation[2] | — |
| Rate table entry | Optical Microscope Leica DM2700 Upright[3] | — |
| Illumination Type | Universal white light LED[4] | — |
| LED Color Temperature | 4500 K[4] | — |
| Contrast Methods (Incident Light) | Brightfield, Darkfield, Polarization, Differential Interference Contrast (DIC), Fluorescence, Oblique Illumination[1] | — |
| Contrast Methods (Transmitted Light) | Brightfield, Darkfield, Phase Contrast, Polarization, Differential Interference Contrast (ICT)[1] | — |
| Objective Turret | Manual; 6x or 7x for objectives with M25 thread; 5x for objectives with M32 thread[1] | — |
| Magnification Changer | Manual; steps: 1x, 1.5x, 2x[1] | — |
| Maximum Sample Size | 100 × 100 mm (foils, wafers, PCBs); thickness up to 80 mm[4] | — |
| Ambient Temperature Range | 15–35 °C[1] | — |
| Relative Humidity (non-condensing) | Max. 80% up to 30 °C[1] | — |
| Supply Voltage | 100 – 240 VAC[5] | — |
| Weight (fully equipped) | More than 18 kg[1] | — |
| Microscope Type | Upright materials microscope[2] | — |
| Category | — | Inspection Microscope without Camera[6] |
| Option | — | Alignment microscope[6] |
Plan your fab
Building a Metrology & Inspection process? Get a complete equipment list.
Open the fab equipment planner →