Comparison ledger
Melles Griot 05 LHP 151, Newport Integrity 1 VCS Vibration Isolation Optical Table, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 05 LHP 151Melles Griot | |
|---|---|---|
| OEM | Melles Griot | Newport |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Melles Griot 05 | Newport Integrity 1 VCS Vibration Isolation Optical Table |
| Specifications | ||
| Configuration | With 05 LPL 340 Power Supply (Does not power on)[1] | 3.4 mm thick skin optical table with integrated damping layer[3] |
| Equipment type | Laser[1] | — |
| Make | Melles Griot[1] | — |
| Model | 05 LHP 151[1] | — |
| Power state | Does not power on[1] | — |
| Working surface | — | 3.4 mm thick ferromagnetic 430 stainless steel[4] |
| Surface flatness | — | ± 0.006 in. (0.15 mm) over 2 ft. (600 mm) square[4] |
| Optical table supports | — | Rigid support legs (upgradable to isolators)[4] |
| Broadband damping | — | Constrained layer core, damped working surface and composite edge finish[4] |
| Tuned damping | — | No[4] |
| Active damping | — | No[4] |
| Mounting hole type | — | 1/4-20 M6 (M- Versions)[4] |
| Mounting hole pattern | — | 1.0 in. grid; 25 mm grid (M- Versions)[4] |
| Mounting hole borders | — | 0.5 in.; 12.5 mm (M- Versions)[4] |
| Hole sealing type | — | Easy clean conical cup, 0.75 in. (19 mm) deep, non-corrosive high impact polymer material[4] |
| Core design | — | Trussed honeycomb, vertically bonded closed cell construction, 0.010 in. steel sheet materials, 0.030 in. triple core interface[4] |
| Bottom skin material | — | 3.4 mm thick carbon steel[4] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →