Comparison ledger
Neslab CFT 75 Chiller, Tri -Mist 850 Electronic Air Filter, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | CFT 75 ChillerNeslab | |
|---|---|---|
| OEM | Neslab | Tri |
| Category | Lab & Support Equipment | Lab & Support Equipment |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | 2009 service-business acquisition | — |
| Control system | — | — |
| Generation | — | — |
| Family | Neslab CFT 75 Chiller | Tri -Mist 850 Electronic Air Filter |
| Cited variants |
| — |
| Specifications | ||
| Make | Neslab[2] | — |
| Model | CFT 75[2] | — |
| Type | Recirculating chiller[1] | — |
| Refrigeration system | Air-cooled[1] | — |
| Phase | Single phase[3] | — |
| Temperature range | 5C to 35C[3] | — |
| Flow rate at 20ºC / 30 PSI (PD2 Pump) | 3.8 GPM[3] | — |
| Cooling capacity at 20C | 2100 Watts[3] | — |
| Available voltage | 200-230V 1 Ph[3] | — |
| Plumbing connections | 1/2 inch NPT[1] | — |
| Cooling fluid | Tap water is the recommended fluid for operation.[1] | — |
| Cooling system | Air-cooled refrigeration system[1] | — |
| Cooling capacity | 2100 watts at 20°C[3] | — |
| Power requirements | 208/230V, 60Hz[1] | — |
| Reservoir volume | 6.8 liters (1.8 gallons)[1] | — |
| Refrigerant | R134a[1] | — |
| Flow rate at 20°C / 30 PSI (PD1 Pump) | 0.9 GPM[3] | — |
| Air intake required | 800 cubic feet per minute[1] | — |
| Temperature stability | ±0.5°[1] | — |
| Dimensions (H x W x D) | 67.3 x 37.8 x 65.4 cm (26½ x 147/8 x 25¾ inches)[1] | — |
| Pump capacity | 60 PSI / 30 Bar; flow 2.0 LPM (5 PSI) to 20 LPM (15-20 PSI) approx.[1] | — |
| Flow Rate at 20ºC / 30 PSI (PD1 Pump) | .9 GPM[3] | — |
| Cooling options | Air only[3] | — |
| Condenser | Air-cooled; air drawn in the front and discharged through rear and side[1] | — |
| Compliance | CE label; LVD 73/23/EEC; UL 3101-1:93; EMC 89/336/EEC EN 55011 Class A[1] | — |
| Fluid viscosity requirement | 50 centistokes or less at lowest operating temperature[1] | — |
| Full rated capacity ambient temperature | Up to approximately +38°C[1] | — |
| Air intake requirement | Approximately 800 cubic feet per minute for full rated capacity[1] | — |
| OEM | Neslab[2] | — |
| Cooling configuration | Air only[3] | — |
| Unit dimensions (H x W x D) | 67.3 x 37.8 x 65.4 cm[1] | — |
| Cooling fluid recommendation | Tap water[1] | — |
| Cooling type | Air cooled[1] | — |
| Cooling capacity at 20°C | 2100 W[3] | — |
Plan your fab
Building a Lab & Support Equipment process? Get a complete equipment list.
Open the fab equipment planner →