Comparison ledger
Applied Materials 0020 17485 Part, Denton Vacuum Desk II, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0020 17485 PartApplied Materials | Desk IIDenton Vacuum |
|---|---|---|
| OEM | Applied Materials | Denton Vacuum |
| Category | Deposition | Deposition |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0020 17485 Part | Denton Vacuum Desk |
| Cited variants | — |
|
| Specifications | ||
| Configuration | Strap, RF Out 2 Balanced Coil Match, Hdp[2] | Metal[3] |
| Weight | — | 103 lbs[1] |
| Dimensions | — | 21 x 21 x 24 inches[1] |
| Electrical | — | 115V/220V 50/60 Hz[1] |
| Argon gas requirement | — | 5 psig, 99.99% purity[1] |
| Turbomolecular pump speed | — | 100 lps[1] |
| Ultimate vacuum | — | 10-6 Torr[1] |
| Mechanical pump speed | — | 60 lpm[1] |
| Chamber diameter | — | 6 inches[1] |
| Wafer size | — | 8 inch[3] |
| Available targets | — | Gold, Gold/Palladium (60:40), Chromium[4] |
| Carbon evaporation accessory | — | Available[4] |
| Cycle time | — | Less than 5 minutes[1] |
| Pump type | — | 100 lps turbomolecular pump, direct drive internal mechanical pump[1] |
| Gas requirement | — | Argon, 5 psig; 99.99% purity[1] |
| Chamber | — | Interchangeable six-inch diameter Pyrex chamber[1] |
| Targets | — | Gold, Gold/Palladium (60:40) and Chromium targets are available[4] |
| Coating materials | — | Au, AuPd, Cr, Pt, etc.[1] |
| Modes of operation | — | Cold sputter mode and etch mode standard[1] |
| Timer | — | Digital timer readout; timer automatically shuts off sputtering system after 999 seconds in manual mode[1] |
| Gauges | — | Solid state electronic bar graphs for gas pressure and electrical current; LED vacuum and current gauges[1] |
Plan your fab
Building a Deposition process? Get a complete equipment list.
Open the fab equipment planner →