Comparison ledger
Dek Horizon 01 iX, Heller 1707 EXL Reflow Soldering, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | ||
|---|---|---|
| OEM | Dek | Heller |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Dek Horizon 01 iX | — |
| Specifications | ||
| Configuration | 50/60 Hz[1] | — |
| Phase | 1 Phase[1] | — |
| OEM | DEK[1] | — |
| Model | Horizon 01 iX[1] | 1707 EXL[4] |
| Category | Assembly / SMT[2] | — |
| Equipment type | Screen printer[1] | — |
| Power requirements | 50/60 Hz, 1 phase, 115 volt[2] | — |
| Operating voltage | 230 V AC[3] | — |
| Frequency | 50 / 60 Hz[3] | 50/60 Hz[5] |
| Current consumption | 10 A[3] | — |
| Maximum board size | up to 620 mm × 508 mm (Long Board Option)[3] | — |
| Position accuracy | ± 12.5 µm at > 2.0 CmK (±6 Sigma)[3] | — |
| System alignment accuracy | ± 15 µm at > 2.0 CmK[3] | — |
| Wet print capability | ± 20 µm at > 2.0 CpK, AVS certified[3] | — |
| Core cycle time | approximately 6.5 seconds (plus processing time)[3] | — |
| Controls / interface | DEK Instinctiv V9 interface (touchscreen, trackball, multilingual, including help tutorials)[3] | — |
| Standard options | automatic stencil adjustment, automatic fiducial recognition, deposit verification, small fiducials, tool deviation monitoring, Cyclone under-table cleaner, Hawkeye camera[3] | — |
| Year of manufacture | 2014[3] | — |
| Make | — | Heller[4] |
| Machine type | — | Reflow soldering machine / reflow soldering oven[4] |
| Vintage | — | 2005[4] |
| Power input | — | Standard 208/240 VAC 3-phase[5] |
| Breaker size | — | 100 amps @ 480 V[5] |
| Optional power inputs | — | 380/400/440/415/480 VAC[5] |
| Overall length | — | 134 in (340 cm)[5] |
| Overall width | — | 54 in (137 cm)[5] |
| Overall height | — | 63 in (160 cm)[5] |
| Typical net weight | — | 3000 lbs (1360 kg)[5] |
| Operating system | — | Windows XP[5] |
| Top heating zones | — | 7[5] |
| Bottom heating zones | — | 7[5] |
| Cooling zones | — | 1[5] |
| Heater type | — | Instant response open coil[5] |
| Heater material | — | Nichrome[5] |
| Temperature range | — | 25-350°C standard; high temperature up to 450°C optional[5] |
| Maximum conveyor speed | — | 74 in/min (188 cm/min)[5] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →