Comparison ledger
Dek Horizon 03, Heller 1707 EXL Reflow Soldering, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | Horizon 03Dek | |
|---|---|---|
| OEM | Dek | Heller |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Dek Horizon 03 | — |
| Specifications | ||
| Type | Screen printer[1] | — |
| Vintage (example unit) | 2004[1] | — |
| DEK serial number (example unit) | 283297[2] | — |
| Installed options (example unit) | Blue USC Graphite Camera, 110V[2] | — |
| Board handling minimum size | 40mm x 50mm[2] | — |
| Board handling maximum size | 510mm x 508mm (20 in. x 20 in.)[2] | — |
| Board maximum weight | 1 kg[2] | — |
| Board size tolerance | +/- 0.3mm (0.012 in.)[2] | — |
| Board thickness | 0.4mm – 6.0mm (0.02 in. – 0.25 in.)[2] | — |
| Underside component clearance | 3mm – 42mm programmable[2] | — |
| Transport clearance | Maximum 3.5mm (0.15 in.) along board edge for belt feed[2] | — |
| Transport speed | 400mm/sec (19.0 in./sec) nominally[2] | — |
| Feed direction | Selectable: left to right, right to left, left to left, right to right[2] | — |
| Rail justification | Front rail fixed[2] | — |
| Interface | SMEMA and all major placement machines[2] | — |
| Interface height | 820mm – 980mm (32 in. – 38.5 in.) configurable[2] | — |
| Width adjustment | Programmable 45mm – 508.55mm (1.75 in. – 20 in.) in 0.1mm increments[2] | — |
| Tooling | Fully adjustable over board range[2] | — |
| Registration / alignment | Vision recognition alignment[2] | — |
| Tooling pin height | 81.0mm, +0.0mm, -0.02mm[2] | — |
| Recognition method | Synthetic shape or video model recognition[2] | — |
| Fiducials | 2 fiducials + non vision mode[2] | — |
| Fiducial size | 0.5mm – 3mm (0.02 in. – 0.14 in.)[2] | — |
| Camera system | Single telecentric XY camera[2] | — |
| Fiducial location | Anywhere on board, self teach/co-ordinate entry (simultaneous look up/down optics)[2] | — |
| Fiducial teach | Shape and dimension parameter entry[2] | — |
| Alignment calibration | Fully automatic[2] | — |
| Operator control | Integrated with printer control[2] | — |
| Make | — | Heller[3] |
| Model | — | 1707 EXL[3] |
| Machine type | — | Reflow soldering machine / reflow soldering oven[3] |
| Vintage | — | 2005[3] |
| Power input | — | Standard 208/240 VAC 3-phase[4] |
| Breaker size | — | 100 amps @ 480 V[4] |
| Optional power inputs | — | 380/400/440/415/480 VAC[4] |
| Frequency | — | 50/60 Hz[4] |
| Overall length | — | 134 in (340 cm)[4] |
| Overall width | — | 54 in (137 cm)[4] |
| Overall height | — | 63 in (160 cm)[4] |
| Typical net weight | — | 3000 lbs (1360 kg)[4] |
| Operating system | — | Windows XP[4] |
| Top heating zones | — | 7[4] |
| Bottom heating zones | — | 7[4] |
| Cooling zones | — | 1[4] |
| Heater type | — | Instant response open coil[4] |
| Heater material | — | Nichrome[4] |
| Temperature range | — | 25-350°C standard; high temperature up to 450°C optional[4] |
| Maximum conveyor speed | — | 74 in/min (188 cm/min)[4] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →