Comparison ledger
Disco DFD 6361 Fully Automatic Dicing, Lapmaster 15, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 15Lapmaster | |
|---|---|---|
| OEM | Disco | Lapmaster |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Disco DFD 6361 Fully Automatic Dicing | Lapmaster 15 |
| Specifications | ||
| Max workpiece size | 300 mm[1] | — |
| X-axis cutting range | 310 mm[1] | — |
| Cut speed | 0.1 to 600 mm/s[1] | — |
| Y1-axis cutting range | 310 mm[1] | — |
| Index step | 0.0001 mm[1] | — |
| Y2-axis positioning accuracy | 0.003 mm/310 (single error), ≤0.002 mm/5[1] | — |
| Z1-axis max stroke | 14.7 mm (for 2-inch blade)[1] | — |
| Z-axis moving resolution | 0.00005 mm[1] | — |
| Z2-axis repeating accuracy | 0.001 mm[1] | — |
| Maximum blade size | 58 mm diameter[1] | — |
| θ-axis max rotating angle | 380 degrees[1] | — |
| Spindle output (standard) | 1.2 kW at 60,000 min⁻¹[1] | — |
| Spindle speed range | 6,000 to 60,000 min⁻¹[1] | — |
| Power supply | 200-240 V AC ±10%, 3-phase, 50/60 Hz[1] | — |
| Power consumption (processing) | 2.2 kW (reference)[1] | — |
| Power consumption (warm-up) | 1.8 kW (reference)[1] | — |
| Air pressure | 0.5 to 0.8 MPa[1] | — |
| Average air consumption | 189.0 L/min (ANR, reference)[1] | — |
| Clean air pressure | 0.5 to 0.8 MPa[1] | — |
| Average clean air consumption | 65.0 L/min (ANR, reference)[1] | — |
| Cutting water pressure | 0.2 to 0.4 MPa[1] | — |
| Cutting water max flow rate | 12 L/min[1] | — |
| Water curtain max flow rate | 1 L/min[1] | — |
| Other water max flow rate | 1 L/min[1] | — |
| Cooling water pressure | 0.2 to 0.4 MPa[1] | — |
| Cooling water flow rate | 3.0 L/min at 0.3 MPa[1] | — |
| Exhaust duct capacity | 5.0 m³/min[1] | — |
| Machine dimensions (W×D×H) | 1200×1550×1800 mm[1] | — |
| Machine weight | Approx. 2,050 kg (without transformer), approx. 2,150 kg (with transformer)[1] | — |
| Input Power | — | 110 Vac[2] |
| Plate Diameter | — | 15 inches (381 mm)[3] |
| Number of Conditioning Rings | — | 3[3] |
| Ring ID | — | 5.5 inches (140 mm)[3] |
| Standard RPM | — | 60[3] |
| RPM Range (Variable Speed Drive) | — | 0-60[3] |
| Drive Motor - Lapper | — | 0.5 HP (0.37 kW)[3] |
| Drive Motor - Polisher | — | 0.75 HP (0.56 kW)[3] |
| Length | — | 25 inches (635 mm)[3] |
| Width | — | 20 inches (508 mm)[3] |
| Height | — | 24 inches (610 mm)[3] |
| Estimated Shipping Weight | — | 285 lbs (129.3 kg)[3] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →