Comparison ledger
Tenney BTC Benchtop Environmental, Tenney BTC Temperature, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | BTC TemperatureTenney | |
|---|---|---|
| OEM | Tenney | Tenney |
| Category | Test & Probe | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Tenney BTC | Tenney BTC |
| Cited variants | ||
| Specifications | ||
| Configuration | Digital Programmable Controller[3] | 2” Cable port[4] |
| Voltage | 220V / 1PH / 60Hz, 23A[3] | 230V, 1 Ph, 60 Hz, 23A[4] |
| ID | 20” W x 20” D x 22" H[3] | — |
| OD | 65” W x 34” D x 38" H[3] | — |
| Weight | 533 lbs[3] | — |
| Manufacturer | Tenney[3] | — |
| Model | BTC[3] | BTC[4] |
| Equipment name | BTC Benchtop Environmental Test Chamber[3] | — |
| Controller | Digital programmable controller[3] | — |
| Power | 220V / 1PH / 60Hz, 23A[3] | 230V, 1 Ph, 60 Hz, 23A[4] |
| Interior dimensions | 20" W x 20" D x 22" H[3] | — |
| Exterior dimensions | 65" W x 34" D x 38" H[3] | — |
| Category | Test & Probe[1] | — |
| Temperature range | — | -70°C to +200°C[4] |
| Inside Dimensions | — | 20” L x 19” W x 22” H[4] |
| Cable port | — | 2"[4] |
| Product type | — | Temperature chamber[4] |
| Line | — | Benchmaster temperature and humidity test chambers[2] |
| Internal workspace | — | 5 cubic feet[2] |
| Inside dimensions | — | 20 in L x 19 in W x 22 in H[4] |
| Temperature control | — | ±1.0°C after stabilization[2] |
| Humidity control | — | N/A or ±5% RH after stabilization, depending on model[2] |
| Air flow rate | — | 115 CFM[2] |
| Heat capacity | — | 2000 W[2] |
| Refrigeration | — | Two 1 HP reciprocating compressors[2] |
| Standard port | — | 3-inch port on left side[2] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →