Comparison ledger
Applied Materials 0010-03254 E Chuck, Tektronix 485 Oscilloscope, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-03254 E ChuckApplied Materials | 485 OscilloscopeTektronix |
|---|---|---|
| OEM | Applied Materials | Tektronix |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Tektronix 485 Oscilloscope |
| Cited variants | — | |
| Specifications | ||
| Frequency | — | 48–440 Hz (50–400 Hz Maximum)[2] |
| Watts Max | — | 80[2] |
| Amps Max | — | 0.9 A 115 V[2] |
| Line Fuse | — | 3 A Fast[2] |
| Bandwidth (50 Ω) | — | DC to at least 350 MHz[1] |
| Bandwidth (1 MΩ) | — | DC to at least 250 MHz[1] |
| Risetime (50 Ω) | — | 1 ns[1] |
| Risetime (1 MΩ) | — | 1.4 ns[1] |
| Sweep rate range | — | 1 ns/div to 0.5 s/div in 27 calibrated steps[1] |
| Deflection factor | — | 5 mV/div to 5 V/div in 10 calibrated steps, variable to 12.5 V/div uncalibrated[1] |
| Input impedance (50 Ω) | — | 50 Ω within 0.5%[1] |
| Input impedance (1 MΩ) | — | 1 MΩ within 1% paralleled by approximately 20 pF[1] |
| CRT display area | — | 8 horizontal x 10 vertical divisions (0.8 cm/div)[1] |
| Accelerating potential | — | 21 kV[1] |
| Calibrator frequency | — | Selectable 1 kHz and 1 MHz[1] |
| Calibrator amplitude | — | 5 V into 1 MΩ load, 0.5 V into 50 Ω load[1] |
| Line voltage range | — | 115 V (90–136 V) or 230 V (180–272 V); 48–440 Hz[1] |
| Power consumption | — | 60 W maximum at 115 V, 60 Hz; 0.9 A max[1] |
| Operating temperature | — | −15°C to +55°C[1] |
| Storage temperature | — | −55°C to +75°C[1] |
| Dimensions (H x W x D) | — | 6 9/16 in x 12 in (with handle) x 18 1/2 in (with panel cover)[1] |
| Net weight (without accessories) | — | 21 lb[1] |
| Net weight (with panel cover and accessories) | — | 24 lb[1] |