Comparison ledger
Applied Materials 0010 47763, IPG Photonics SYS-MA-QD 533 SA 00 NCA 2 Multi-Axis Laser Welder, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010 47763Applied Materials | |
|---|---|---|
| OEM | Applied Materials | IPG |
| Category | Etch | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0010 47763 | IPG Photonics |
| Specifications | ||
| Configuration | 2nd Source New[1] | Voltage 230 VAC[7] |
| Type | Monopolar Dual Heated[2] | — |
| Description | ASSY, ESC, BONDED, MONOPOLAR DUAL HEATED[3] | — |
| Possible Materials | Al2O3 (aluminum oxide) or AlN (aluminum nitride)[2] | — |
| Model | 0010-47763[1] | — |
| OEM | Applied Materials[1] | — |
| Material (possible) | Al2O3 (aluminum oxide) or AlN (aluminum nitride)[2] | — |
| Application | Fixing wafers in etching process (PVD, CVD, ETCH)[2] | — |
| Quantity available (source) | 1[2] | — |
| Part number | 0010-47763[2] | — |
| Component type | Electrostatic chuck (ESC) assembly[4] | — |
| Designation | ASSY, ESC, BONDED, MONOPOLAR DUAL HEATED[3] | — |
| Wafer size reference | 300 mm[5] | — |
| Associated part number | 0041-39086[6] | — |
| Phase | — | Power 25FLA, 3 Phase[7] |
| Voltage | — | 230 VAC[8] |
| Frequency | — | 60Hz[7] |
| Power | — | 25FLA, 3 Phase[8] |
| Laser source | — | IPG YLR-450/4500-MM-AC fiber laser[8] |
| Wobbler | — | IPG FLW-D30 wobbler[7] |
| Workspace | — | 500 mm x 300 mm x 450 mm[8] |
| Motion axes | — | X, Y, Z, A Motion System[7] |
| Simultaneous control | — | 4 axes of simultaneous control[8] |
| Control console | — | Swing arm mounted control console with 17-inch flat screen monitor[7] |
| Laser system class | — | CDRH Class I Laser System[7] |
| Process gas control | — | Process Gas Control for Two Gasses[7] |
| Jog pendant | — | Jog Pendant[7] |
| CNC interface | — | Custom IPG CNC Interface[7] |
| Z stage | — | Ballscrew-driven Z stage with brake[7] |
| Rotary stage | — | 450mm travel, servo gear-driven rotary stage[7] |
| X and Y stages | — | Linear motor driven X and Y stages[7] |
Plan your fab
Building a Etch process? Get a complete equipment list.
Open the fab equipment planner →