Comparison ledger
Applied Materials 0020 54137 Part, Speedline Momentum Elite, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0020 54137 PartApplied Materials | Momentum EliteSpeedline |
|---|---|---|
| OEM | Applied Materials | Speedline |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0020 54137 Part | Speedline Momentum |
| Cited variants | — |
|
| Specifications | ||
| Configuration | Conn Ector Copper Threaded W / Solder Ptg[2] | 50/60 Hz[3] |
| Largest Single Load | — | 6 Amps[3] |
| Full Load Current | — | 10 Amps[3] |
| Maximum Board Size (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[4] |
| Maximum Board Size (X x Y) in Staging Mode (Momentum Elite) | — | 457 mm x 508 mm (18" x 20")[4] |
| Minimum Board Size (X x Y) | — | 50.8 mm x 50.8 mm (2" x 2")[4] |
| Board Thickness | — | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils[4] |
| Maximum Print Area (X x Y) | — | 609.6 mm x 508 mm (24" x 20")[4] |
| Print Gap (Snap-off) | — | 0 mm to 6.35 mm (0" to 0.25")[4] |
| Stencil Frame Size | — | 737 mm x 737 mm (29" x 29")[4] |
| Vision Field-of-View (FOV) | — | 106 mm x 8 mm[4] |
| Total System Alignment | — | 12.5 microns[4] |
| Alignment Repeatability | — | ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0[4] |
| Power Requirements | — | 200 to 240 VAC Single Phase 50/60Hz[4] |
| Air Supply | — | 100 PSI at 4 CFM[4] |
| Dimensions (W x D x H) | — | 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")[4] |
| Machine Weight | — | 899 kg (1982 lbs)[4] |
| Wet Print Accuracy | — | 20 microns @ 6 sigma, Cpk > 2[5] |
| Maximum Board Weight | — | 4.5 kg (9.92 lbs)[5] |
| Board Edge Clearance | — | 3.0 mm (0.118")[5] |
| Underside Clearance | — | 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")[5] |
| Equipment type | — | Screen printer[3] |
| Maximum board size | — | 609.6 mm x 508 mm (24 in x 20 in)[5] |
| Staging mode board size | — | 457 mm x 508 mm (18 in x 20 in)[5] |
| Minimum board size | — | 50.8 mm x 50.8 mm (2 in x 2 in)[5] |
| Board thickness | — | 0.2 mm to 5.0 mm, up to 6.0 mm without top clamp foils[5] |
| Maximum print area | — | 609.6 mm x 508 mm (24 in x 20 in)[6] |
| Print gap (snap-off) | — | 0 mm to 6.35 mm (0 in to 0.25 in)[6] |
| Stencil frame size | — | 737 mm x 737 mm (29 in x 29 in)[6] |
| Vision field of view | — | 106 mm x 8 mm[6] |
| Camera system | — | Single digital camera (look up/down vision)[6] |
| Accuracy and repeatability | — | ±0.0005 in at 6 sigma, Cpk >= 2.0[6] |
| Power requirements | — | 200 to 240 VAC single phase, 50/60 Hz, 15 A[6] |
| Dimensions | — | 1675.5 mm W x 1593.1 mm D x 1638.4 mm H[6] |
| Machine weight | — | 899 kg (1982 lb)[6] |
| Load current | — | Largest single load: 6 A; full load current: 10 A[3] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →