Speedline

Momentum Elite

Assembly / SMT Speedline Momentum family

Research Quality: 50% complete

The Speedline MPM Momentum Elite is a screen printer for SMT assembly. The MPM Momentum Elite is the top performer of the Momentum series, offering the highest throughput and shortest cycle times. The MPM Momentum Elite is configured with a triple track rail system featuring an input buffer, a central processing section, and an output buffer.^[1]^[2]

Momentum Elite — Inventory photo — Fig. 01Momentum EliteInventory photo^[3]

Power

50/60 Hz^[3]

Vacuum

100 PSI at 4 CFM^[1]

Performance

12.5 microns^[1]

What it is

The Speedline Momentum Elite is a screen printer used in SMT assembly.^[3]^[2]^[5]

The Momentum Elite is the top-performer of the Momentum series.^[2]^[5]

How it works

The Momentum Elite uses a triple track rail system with an input buffer, a central processing section, and an output buffer.^[2]^[5]

The Momentum Elite uses a vision system and alignment control to place the print pattern relative to board fiducials before deposition.^[5]

Where it fits in the process flow

The Momentum Elite is used for high-throughput, high-accuracy print production.^[2]^[5]

Applications

The Momentum Elite is used in SMT screen-printing applications for printed circuit board assembly.^[3]^[2]^[5]

Why won't it start?

Documented failure modes, common issues, and field considerations.

One source states the machine was complete and working but could not be fully tested due to lack of power supply.

What do the numbers mean?

Power & electrical6

50/60 Hz^[3]; 200-240 V^[3]
Largest Single Load: 6 Amps^[3]
Full Load Current: 10 Amps^[3]
Power Requirements: 200 to 240 VAC Single Phase 50/60Hz^[1]
Power requirements: 200 to 240 VAC single phase, 50/60 Hz, 15 A^[5]

Vacuum & pumping1

Air Supply: 100 PSI at 4 CFM^[1]2 sources

Optics & imaging1

Camera system: Single digital camera (look up/down vision)^[5]

Performance5

Total System Alignment: 12.5 microns^[1]2 sources
Alignment Repeatability: ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0^[1]
Alignment Repeatability: +/-12.5 microns @ 6 sigma, Cpk > 2^[2]
Wet Print Accuracy: 20 microns @ 6 sigma, Cpk > 2^[2]
Accuracy and repeatability: ±0.0005 in at 6 sigma, Cpk >= 2.0^[5]

Dimensions & facilities7

Dimensions (W x D x H): 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")^[1]
Machine Weight: 899 kg (1982 lbs)^[1]
Maximum Board Weight: 4.5 kg (9.92 lbs)^[2]
Board Edge Clearance: 3.0 mm (0.118")^[2]
Underside Clearance: 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")^[2]
Dimensions: 1675.5 mm W x 1593.1 mm D x 1638.4 mm H^[5]
Machine weight: 899 kg (1982 lb)^[5]

Configuration & options18

Maximum Board Size (X x Y): 609.6 mm x 508 mm (24" x 20")^[1]
Maximum Board Size (X x Y) in Staging Mode (Momentum Elite): 457 mm x 508 mm (18" x 20")^[1]
Minimum Board Size (X x Y): 50.8 mm x 50.8 mm (2" x 2")^[1]
Board Thickness: 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils^[1]
Maximum Print Area (X x Y): 609.6 mm x 508 mm (24" x 20")^[1]
Print Gap (Snap-off): 0 mm to 6.35 mm (0" to 0.25")^[1]
Stencil Frame Size: 737 mm x 737 mm (29" x 29")^[1]
Vision Field-of-View (FOV): 106 mm x 8 mm^[1]
Equipment type: Screen printer^[3]
Maximum board size: 609.6 mm x 508 mm (24 in x 20 in)^[2]
Staging mode board size: 457 mm x 508 mm (18 in x 20 in)^[2]
Minimum board size: 50.8 mm x 50.8 mm (2 in x 2 in)^[2]
Board thickness: 0.2 mm to 5.0 mm, up to 6.0 mm without top clamp foils^[2]
Maximum print area: 609.6 mm x 508 mm (24 in x 20 in)^[5]
Print gap (snap-off): 0 mm to 6.35 mm (0 in to 0.25 in)^[5]
Stencil frame size: 737 mm x 737 mm (29 in x 29 in)^[5]
Vision field of view: 106 mm x 8 mm^[5]
Load current: Largest single load: 6 A; full load current: 10 A^[3]

Vintage & configurations

Documented models & variants

Designation	Generation	Vintage	Changes	Source
Momentum Elite DL	—	—	—	youtube.com^[6]

Interested in this tool?

Need help with this tool?Embed spec card

What replaced it?

Alternatives

Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.

DEK 288— Same function class: Assembly / SMT, nullCompare in depthsource^[1]
DEK 248— Same function class: Assembly / SMT, nullCompare in depthsource^[1]
Dek Horizon 03 i— Same function class: Assembly / SMT, nullCompare in depthsource^[1]
Dek NeoHorizon 03 ix— Same function class: Assembly / SMT, nullCompare in depthsource^[1]

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Configuration50/60 Hz^[3]
Configuration200-240 V^[3]
Largest Single Load6 Amps^[3]
Full Load Current10 Amps^[3]
Power Requirements200 to 240 VAC Single Phase 50/60Hz^[1]
Air Supply100 PSI at 4 CFM^[1]
Power requirements200 to 240 VAC single phase, 50/60 Hz, 15 A^[5]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the maximum board size?

The maximum board size is 609.6 mm by 508 mm.^[2]^[5]

What is the minimum board size?

The minimum board size is 50.8 mm by 50.8 mm.^[2]^[5]

Not publicly documented

The following facts about the Momentum Elite are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Momentum Elite are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the Momentum Elite are not on record.
Answerable by: an engineer who operated it or OEM installation records
The process node or technology generation of the Momentum Elite is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Momentum Elite are on record.
Answerable by: an OEM parts catalog or a service engineer
No publicly hosted manuals, SOPs, or datasheets for the Momentum Elite are on record.
Answerable by: university cleanroom staff or an OEM application specialist