Comparison ledger
Branson 101-149-053 Gold Booster, ESI 5330, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101-149-053 Gold BoosterBranson | 5330ESI |
|---|---|---|
| OEM | Branson | ESI |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Branson 101-149-053 Gold Booster | ESI 5330 |
| Specifications | ||
| Configuration | 1:1.5[1] | — |
| Manufacturer | Branson[2] | — |
| Model | 101-149-053[2] | 5330[4] |
| Type | Gold Booster[2] | — |
| Operating frequency | 20 kHz[3] | — |
| Gain | 1:1.5[2] | — |
| Mounting thread | 1/2-20[3] | — |
| Length | 5.4 in[3] | — |
| Gain ratio | 1:1.5[2] | — |
| Rep Rate Range (kHz) | — | 30-70[4] |
| Max Work Surface Power (W) | — | 6.1[4] |
| Pulse Width (ns) | — | 80 @30kHz, 140 @70kHz[4] |
| Rep Rate Range | — | 30-70 kHz[4] |
| Max Work Surface Power | — | 6.1 W[4] |
| Pulse Width | — | 80 ns @ 30 kHz, 140 ns @ 70 kHz[4] |
| Year | — | 2004 vintage[4] |
| Laser Type | — | High power diode pumped, repetitively Q-switched Nd:YAG[5] |
| Wavelength | — | 355 nm[5] |
| Operating Mode | — | TEM oo (gaussian power distribution across the beam)[5] |
| Panel Size | — | 21 in x 25 in (533 mm x 635 mm)[5] |
| Resolution | — | < 0.00004 in (1 μm)[5] |
| Accuracy | — | ± 0.0008 in (± 20 μm)[5] |
| Make | — | ESI[4] |
| Device type | — | Laser[4] |
| Product type | — | UV Laser μVia Drill[5] |
| Application | — | High-quality microvias in small-geometry circuit boards and electronic packages[5] |
| Pulse repetition frequency | — | Up to 70 kHz[5] |
| Average power at work surface | — | > 5.7 W @ 30 kHz[5] |
| Pulsewidth | — | 60 nsec typical[5] |
| Panel size | — | 21” x 25” (533 mm x 635 mm)[5] |
| Control operating system | — | Real-time UNIX (LynxOS)[5] |
| Laser beam positioning type | — | Cross-axis with galvanometer[5] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →