Comparison ledger
Disco DFD 6340 Fully Automatic Dicing, Lapmaster 15, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 15Lapmaster | |
|---|---|---|
| OEM | Disco | Lapmaster |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Disco DFD 6340 Fully Automatic Dicing | Lapmaster 15 |
| Specifications | ||
| Maximum workpiece size | ø8"[1] | — |
| X-axis cutting range | 210 mm[1] | — |
| Maximum cutting speed | 600 mm/s[1] | — |
| Y1-axis cutting range | 210 mm[1] | — |
| Y1-axis index step | 0.0001 mm[1] | — |
| Y2-axis index positioning accuracy | 0.002/210 (single error) / 0.002 or less/5[1] | — |
| Z1-axis maximum stroke | 19.22 mm[1] | — |
| Z1-axis moving resolution | 0.00005 mm[1] | — |
| Z2-axis repeatability accuracy | 0.001 mm[1] | — |
| Maximum blade size | ø58 mm[1] | — |
| θ-axis maximum rotating angle | 380°[1] | — |
| Spindle output | 1.2 kW at 60,000 min-1[1] | — |
| Spindle rated torque | 0.19 N·m[1] | — |
| Spindle revolution speed range | 6,000 ~ 60,000 min-1[1] | — |
| Applicable tape frame | 2-8-1[1] | — |
| Power supply | 200 ~ 240 V AC ±10%, 3-phase (50/60 Hz)[1] | — |
| Power consumption (when processing) | 2.1 kW (for reference)[1] | — |
| Power consumption (during warm-up) | 1.8 kW (for reference)[1] | — |
| Maximum power | 6.9 kVA[1] | — |
| Air pressure | 0.5 ~ 0.8 MPa[1] | — |
| Air maximum consumption | 378.0 L/min (ANR)[1] | — |
| N2 pressure | 0.5 ~ 0.8 MPa[1] | — |
| N2 maximum consumption | 216.0 L/min (ANR)[1] | — |
| Cutting water pressure | 0.2 ~ 0.4 MPa[1] | — |
| Cutting water maximum flow rate | 12 L/min[1] | — |
| Water curtain maximum flow rate | 1 L/min[1] | — |
| Other water maximum flow rate | 1 L/min[1] | — |
| Cooling water pressure | 0.2 ~ 0.4 MPa[1] | — |
| Cooling water flow rate | 3.0 L/min at 0.3 MPa[1] | — |
| Exhaust duct capacity | 5.0 m³/min[1] | — |
| Machine dimensions (W x D x H) | 1,180 x 1,110 x 1,850 mm[1] | — |
| Machine weight (without transformer) | Approximately 1,600 kg[1] | — |
| Machine weight (with transformer for overseas use) | Approximately 1,670 kg[1] | — |
| Input Power | — | 110 Vac[2] |
| Plate Diameter | — | 15 inches (381 mm)[3] |
| Number of Conditioning Rings | — | 3[3] |
| Ring ID | — | 5.5 inches (140 mm)[3] |
| Standard RPM | — | 60[3] |
| RPM Range (Variable Speed Drive) | — | 0-60[3] |
| Drive Motor - Lapper | — | 0.5 HP (0.37 kW)[3] |
| Drive Motor - Polisher | — | 0.75 HP (0.56 kW)[3] |
| Length | — | 25 inches (635 mm)[3] |
| Width | — | 20 inches (508 mm)[3] |
| Height | — | 24 inches (610 mm)[3] |
| Estimated Shipping Weight | — | 285 lbs (129.3 kg)[3] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →