Comparison ledger
GCA 6100 C Wafer, SUSS MicroTec ACS200, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 6100 C WaferGCA | ACS200SUSS MicroTec |
|---|---|---|
| OEM | GCA | SUSS MicroTec |
| Category | Lithography | Lithography |
| Wafer size | 100mm | 100mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | i-line |
| Family | GCA 6100 C Wafer | SUSS MicroTec ACS200 |
| Cited variants | — |
|
| Specifications | ||
| Configuration | Maximus 1000 Light Source (350w)[2] | — |
| Wafer size | 100 mm AWH1 (Automatic Wafer Handler)[2] | Wafer Equipment[6] |
| Lens | 10X g-line (436), NA=0.28[2] | — |
| Equipment Rack | (Top Down)[2] | — |
| Make | GCA[2] | — |
| Model | 6100 C[2] | ACS200 Gen3[4] |
| Category | Lithography[3] | — |
| Wafer handling | AWH1 (Automatic Wafer Handler)[2] | Standard SEMI-wafers of 100 mm and 150 mm diameter[4] |
| Stage travel | 150 mm X/Y stage travel[2] | — |
| Optics | 10X g-line (436), NA=0.28[2] | — |
| Light source | Maximus 1000 Light Source (350w)[2] | — |
| Controller | RZE PC Upgrade Controller (v605.1 Operating System)[2] | — |
| Alignment monitor | Alignment Monitor & PC Monitor[3] | — |
| Tool type | — | Modular cluster tool[4] |
| Process | — | Coating and development of i-line photoresists[4] |
| Loading/unloading ports | — | Two loading/unloading ports: one cassette for coating and one cassette for development[4] |
| Wafer centering | — | Wafer centering station[4] |
| Spin-coating modules | — | Two spin-coating modules[4] |
| Development module | — | One development module with puddle and spray options[4] |
| Hotplates and coolplates | — | Two stacks of hotplates (9 in total) and coolplates (3 in total)[4] |
| HMDS priming | — | Additional HMDS-priming module[4] |
| Supported wafer materials | — | Opaque wafers (silicon, SOI) and transparent wafers (glass, fused-silica, sapphire)[4] |
| Photoresists available | — | AZ ECI 3007, AZ ECI 3027, AZ 10XT-20, AZ 10XT-60, AZ 15nXT, AZ 40XT[4] |
| Wafer diameter supported | — | 100mm and 150mm (on request)[4] |
| Wafer types | — | Opaque (silicon, SOI) and transparent (glass, fused-silica, sapphire)[4] |
| Number of spin-coating modules | — | 2[4] |
| Number of development modules | — | 1[4] |
| Number of hotplates | — | 9 (total across two stacks)[4] |
| Number of coolplates | — | 3[4] |
| HMDS priming module | — | Yes (included)[4] |
| Robot model | — | Sankyo SC5000[4] |
| Photoresist type | — | i-line[4] |
| Voltage | — | 400 V[5] |
| Phase | — | 3 Phase[5] |
| Frequency | — | 60 Hz[5] |
| Thermal modules | — | Two stacks of hotplates (9 in total) and coolplates (3 in total), including an additional HMDS-priming module[4] |
| Wafer material | — | Opaque wafers (silicon, SOI) and transparent wafers (glass, fused-silica, sapphire)[4] |
| Central robot | — | Individual processing modules are fed by a central robot[4] |
| Robot | — | central robot feeding the individual processing modules[4] |
| Supported wafer diameters | — | 100 mm and 150 mm diameter[4] |
| OEM | — | SUSS MicroTec[7] |
| Standard wafer diameter handled | — | 100 mm and 150 mm diameter SEMI wafers[4] |
| Hotplates | — | Two stacks of hotplates, 9 total[4] |
| Coolplates | — | 3 coolplates[4] |
| Handling architecture | — | Individual processing modules are fed by a central robot[4] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →