Comparison ledger
Heller 1707 EXL Reflow Soldering, Juki JM 100 Placement, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | JM 100 PlacementJuki | |
|---|---|---|
| OEM | Heller | Juki |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Juki JM 100 Placement |
| Specifications | ||
| Make | Heller[1] | — |
| Model | 1707 EXL[1] | JM 100[3] |
| Machine type | Reflow soldering machine / reflow soldering oven[1] | — |
| Vintage | 2005[1] | — |
| Power input | Standard 208/240 VAC 3-phase[2] | — |
| Breaker size | 100 amps @ 480 V[2] | — |
| Optional power inputs | 380/400/440/415/480 VAC[2] | — |
| Frequency | 50/60 Hz[2] | — |
| Overall length | 134 in (340 cm)[2] | — |
| Overall width | 54 in (137 cm)[2] | — |
| Overall height | 63 in (160 cm)[2] | — |
| Typical net weight | 3000 lbs (1360 kg)[2] | — |
| Operating system | Windows XP[2] | — |
| Top heating zones | 7[2] | — |
| Bottom heating zones | 7[2] | — |
| Cooling zones | 1[2] | — |
| Heater type | Instant response open coil[2] | — |
| Heater material | Nichrome[2] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[2] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[2] | — |
| Configuration | — | Mechanical Fixed Feeder Bank (Front & Rear)[3] |
| Manufacturer | — | Juki[4] |
| Category | — | Assembly / SMT[4] |
| Machine name | — | Juki JM 100 Placement System[3] |
| Component insertion speed | — | 0.6 sec/part for vacuum nozzle and 0.8 sec/part for gripper nozzle[5] |
| Board size, single clamping | — | 50 mm x 50 mm to 410 mm x 360 mm[5] |
| Board size, double clamping | — | 80 mm x 100 mm to 800 mm x 360 mm[5] |
| PCB weight | — | Max. 4 kg[5] |
| Component height | — | Max. 30 mm[5] |
| Placement accuracy, laser recognition | — | ±0.05 mm (3σ)[5] |
| Placement accuracy, vision recognition | — | ±0.04 mm[5] |
| Power supply | — | 200 to 415V AC 3-phase[6] |
| Apparent power | — | 1.8kVA[6] |
| Operation air pressure | — | 0.5±0.06MPa[6] |
| Air consumption | — | 82L/min[6] |
| Conveyor height | — | 900 mm ±20 mm[6] |
| Machine dimensions | — | 1,500 x 1,500 x 1,45 mm[6] |
| Mass | — | 1,300 kg[6] |
| Feeder bank | — | Mechanical Fixed Feeder Bank (Front & Rear)[3] |
| Nozzle | — | 2071 Mini Chuck Nozzle[3] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →