Juki
JM 100 Placement
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Juki JM 100 Placement is a placement system identified by model JM 100. The Juki JM 100 Placement is categorized as Assembly / SMT. The JM-100 platform supports component insertion speeds down to 0.6 seconds per part for vacuum nozzle insertion.[1][2][3]
What it is
General reference — not yet source-verifiedPlacement systems in SMT assembly place electronic components onto printed circuit boards as part of automated board assembly. Placement systems of this class are used where component handling, registration, and insertion accuracy must be coordinated with feeders, board transport, and downstream joining steps.
How it works
The JM 100 uses a Takumi head with 8 nozzles. The JM 100 uses a dynamic or variable-height laser sensor that adapts to component height. The JM 100 provides laser centering and offers vision centering as an option. The JM 100 also offers optional 3D image recognition. The JM 100 supports active clinching, and the clinch unit bends inserted component leads to secure them to the board.[2][5][3]
Where it fits in the process flow
The JM 100 is used in electronics assembly for insertion work within an SMT production environment. The JM 100 is intended to automate manual insertion processes and can be integrated with JaNets line control software. The JM 100 can output management data, and an optional external output function can share data with MES software.[1][2][5][3]
Applications
General reference — not yet source-verifiedEquipment in this class is used for board assembly tasks that involve placing or inserting electronic parts onto printed circuit substrates. Such tools are especially relevant when product mixes include varied package forms, leaded parts, or operations that are difficult to sustain by hand with consistent alignment and throughput.
What do the numbers mean?
Power & electrical1
Vacuum & pumping2
- Component insertion speed
- 0.6 sec/part for vacuum nozzle and 0.8 sec/part for gripper nozzle[2]
Wafer handling2
- 2071 Mini Chuck Nozzle[4]
Optics & imaging1
Performance1
Dimensions & facilities5
Configuration & options12
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What board sizes can the JM 100 handle?
The JM 100 supports board sizes from 50 mm × 50 mm to 410 mm × 360 mm in 1 time clamping standard specification, from 80 mm × 100 mm to 410 mm × 360 mm in 1 time clamping clinch specification, from 80 mm × 50 mm to 410 mm × 360 mm without using the clinch unit, and up to 800 mm × 360 mm in 2 times clamping configurations.[2][3]
Not publicly documented
The following facts about the JM 100 Placement are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the JM 100 Placement are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the JM 100 Placement are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the JM 100 Placement are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the JM 100 Placement are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the JM 100 Placement is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]waferpedia.com — waferpedia.comwaferpedia.com
- [2]juki.co.jp — juki.co.jpjuki.co.jp
- [3]jukiamericas.com — jukiamericas.comjukiamericas.com
- [4]Inventory photo
- [5]https://www.smtmachine.eu/wp-content/uploads/2024/07/JUKI-JM-100-Insertion-Machine.pdf — smtmachine.eusmtmachine.eu
Last updated Oct 16, 2026.
Compare with similar tools
View all →The ASM DEK NeoHorizon iX SMT is an automatic SMT solder paste screen printer with a touchscreen and keyboard operator interface.
The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
