Comparison ledger
KLA P-20H and KLA P 22 H Surface, side by side. Every value shown is drawn from its cited encyclopedia entry.
| Attribute | P-20HKLA | |
|---|---|---|
| OEM | KLA | KLA |
| Category | Metrology & Inspection | Metrology & Inspection |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | Legacy | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | KLA P-20H | KLA P |
| Specifications | ||
| Tool type | Stylus profilometer[1] | — |
| Stylus tip radius | 2 µm[1] | — |
| Stylus cone angle | 60°[1] | — |
| Vertical range | 325 µm[1] | — |
| Sensor element | Capacitive sensor element[1] | — |
| Motion stage | Precision motion stage[1] | — |
| Vertical resolution | Roughly nm scale[1] | — |
| Stage movement | 8 inch[1] | — |
| Serial number | 09940111[1] | — |
| Tool owner | Joseph Jacob[1] | — |
| Access mode | Walk-up tool (no reservation needed)[1] | — |
| Configuration | — | Step Height Precision Micro 2D Scanner[2] |
| Scan Length | — | 60 mm[2] |
| Scan Speed | — | 1 um/sec to 25mm/ sec[2] |
| Scan Method | — | Bi-directional moving stylus[2] |
| Sampling Rate | — | 5, 10, 20, 50, 100, 200, 500 , 1000 Hz[2] |
| Stylus Force | — | Adjustable between 0.05 ~ 50mg[2] |
| Step Height Repeatability, 1 | — | 0.75 nm or 0.1%:Sample Handling:[2] |
| Theta | — | 360[2] |
Plan your fab
Building a Metrology & Inspection process? Get a complete equipment list.
Open the fab equipment planner →