Comparison ledger
SUSS MicroTec SD 12 Semi-Automatic Wet Processing, Thermo Fisher 1300 Series Safety, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | SD 12 Semi-Automatic Wet ProcessingSUSS MicroTec | 1300 Series SafetyThermo Fisher |
|---|---|---|
| OEM | SUSS MicroTec | Thermo Fisher |
| Category | Wet Processing / Clean | Wet Processing / Clean |
| Wafer size | 150mm | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | 2026 Third-party support only |
| Control system | — | — |
| Generation | — | — |
| Family | SUSS MicroTec SD 12 Semi-Automatic Wet Processing | Thermo Fisher 1300 |
| Specifications | ||
| Configuration | IPC With Touch Screen[1] | Class II[2] |
| Operating System, | Microsoft Windows 10[1] | — |
| Speed | Up to 3.000 rpm (Depending on Substrate Size and Load)[1] | — |
| Acceleration | Programmable[1] | — |
| Spinning Time | 0.1 up to 999s[1] | — |
| OEM | SUSS[1] | — |
| Model | SD 12 Semi-Automatic Wet Processing[1] | — |
| Control interface | IPC with touch screen[1] | — |
| Process chamber | Stainless steel[1] | — |
| Dispense arm | Motorized[1] | — |
| Connection | Ethernet link[1] | — |
| Safety package | Solvent[1] | — |
| Back side rinse | Included[1] | — |
| Drying | Nitrogen drying[1] | — |
| Filter unit | Solvent filter unit[1] | — |
| Media storage | SS EX[1] | — |
| Solvent developer insert ring | R6-R8-BSR[1] | — |
| Power | 50/60 Hz, 3x400 VAC[1] | — |
| Spinning time | 0.1 to 999 s[1] | — |
| CDA purge | Included for spin light tower[1] | — |
| Tool status display | Red, yellow, blue[1] | — |
| Vacuum chuck | R6 with exchangeable centering pins for 150 mm and 152 mm round SEMI standard wafers[1] | — |
| Pressure tank system | 10 L stainless steel tank with empty, low, full, and overfull sensors; quick connector for manual filling; pressure regulated with gauge; maximum pressure 2.5 bar[1] | — |
| Waste canister | 20 L stainless steel waste tank with full and overfull level sensor; spill pan with leakage sensor included[1] | — |
| Tape frame vacuum chuck | For 150 mm wafer[1] | — |
| Dispense system | FFKM dispense system 660 / Puddle & FANSPRAY[1] | — |
| Max Pressure | 2.5 bar[1] | — |
| Wafer size | For 150 mm Wafer FFKM[1] | — |
| Cabinet type | — | Class II, Type A2 biological safety cabinet[3] |
| Airflow compensation | — | SmartFlow airflow compensation system[3] |
| Motors | — | Dual DC motors[3] |
| Front window design | — | SmartClean front window design[3] |
| Control panel | — | Intuitive control panel with constant readout of downflow and inflow velocities and filter reserve status[3] |
| UV light | — | Programmable UV light[3] |
| SmartPort | — | SmartPort convenience for routing tubing and cables through the side walls[3] |
| Available widths | — | 3-foot, 4-foot, 5-foot, and 6-foot sizes[3] |
| Front opening choices | — | 8-inch or 10-inch front opening[3] |
| Filter specification | — | H14 HEPA filters, EN 1822, 99.995% @ MPPS[4] |
| Certification | — | NSF/ANSI 49, UL, CE[4] |
| Service valves | — | Up to 6 total, 3 on each side wall[4] |
Plan your fab
Building a Wet Processing / Clean process? Get a complete equipment list.
Open the fab equipment planner →