Comparison ledger
Accretech W GM 4200 E Edge, Lapmaster 15, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | W GM 4200 E EdgeAccretech | 15Lapmaster |
|---|---|---|
| OEM | Accretech | Lapmaster |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Accretech W GM 4200 E Edge | Lapmaster 15 |
| Specifications | ||
| Wafer type | PSiC[1] | — |
| Configuration | Grinding speed:[1] | — |
| Grinding speed | 6mm/sec[1] | — |
| Loader unit type | Cassette carrier 8": Entegris XT 203-0510 & 6": Entegris PA 182-60 MB-61 C 02)[1] | — |
| Number of cassettes | 4 load ports with barcode reader[1] | — |
| OEM | Accretech / TSK[1] | — |
| Model | W GM 4200 E[1] | — |
| Equipment type | Edge Grinder[2] | — |
| Wafer sizes | 2 inch, 6 inch[1] | — |
| Grinding throughput | 24 wafers/h in 6"; 8 wafers/h in 8"[1] | — |
| Load ports | 4 load ports with barcode reader[1] | — |
| Category | Dicing & Grinding[2] | — |
| Input Power | — | 110 Vac[3] |
| Plate Diameter | — | 15 inches (381 mm)[4] |
| Number of Conditioning Rings | — | 3[4] |
| Ring ID | — | 5.5 inches (140 mm)[4] |
| Standard RPM | — | 60[4] |
| RPM Range (Variable Speed Drive) | — | 0-60[4] |
| Drive Motor - Lapper | — | 0.5 HP (0.37 kW)[4] |
| Drive Motor - Polisher | — | 0.75 HP (0.56 kW)[4] |
| Length | — | 25 inches (635 mm)[4] |
| Width | — | 20 inches (508 mm)[4] |
| Height | — | 24 inches (610 mm)[4] |
| Estimated Shipping Weight | — | 285 lbs (129.3 kg)[4] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →