Comparison ledger
Accretech W-GM-4200 Wafer Edge, Blanchard 18 D Surface, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | W-GM-4200 Wafer EdgeAccretech | 18 D SurfaceBlanchard |
|---|---|---|
| OEM | Accretech | Blanchard |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | 150mm | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Accretech W-GM-4200 Wafer Edge | Blanchard 18 D Surface |
| Specifications | ||
| Voltage | AC200V +-5% 3ø[1] | 416 V[4] |
| Power Consumption | 5.0 KVA[2] | — |
| Main Air Source | 0,56Mpa[2] | — |
| Spindle Air Source | 0,56Mpa[2] | — |
| Grinding and Cleanig Water | 15L/min, 0.3Mpa, 18°C recommended[2] | — |
| Mist Exhaust | 5m3/min[2] | — |
| Wafer size | 150mm, 200mm[2] | — |
| Wafer Thickness | 0,4-1,0mm[2] | — |
| Wafer type | Wafer with OF or notch[2] | — |
| Notch Angle | 89deg – 95deg[2] | — |
| Notch Angle Setting Value | 0,001deg step[2] | — |
| Grinding Unit | Left/Right[2] | — |
| Grinding wheel | For Periphery and for Notch[2] | — |
| Periphery Grinding wheel speed | 2500m/min (wheel 200mm, at 4000rpm)[2] | — |
| Configuration | Rotational Frequency of Spindle for Notch: 70000-94000rpm[2] | — |
| Driving System for Peripheral Grinding | Built-in by inverter motor[2] | — |
| Driving System for Notch Grinding | Air bearing system[2] | — |
| Make | Accretech / TSK[3] | Blanchard[5] |
| Model | W-GM-4200[3] | 18 D[5] |
| Wafer Sizes | 6 inch[3] | — |
| Rotational Frequency of Spindle for Notch | 70000-94000rpm[2] | — |
| 4 cassette loading stages | for wafer size of 6” and 8”[2] | — |
| Phase | — | 3 Phase[4] |
| Cycles | — | 50[4] |
| Control Voltage | — | 110[4] |
| Asset # | — | 153970[4] |
| Power | — | 416 V, 3 phase[5] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →