Comparison ledger
ADT 7100 Dicing, Disco DAG 810 Automatic, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 7100 DicingADT | DAG 810 AutomaticDisco |
|---|---|---|
| OEM | ADT | Disco |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | ADT 7100 | Disco DAG 810 |
| Cited variants | — |
|
| Specifications | ||
| Configuration | UPS for the machine[3] | Taiko Option[2] |
| Tool manufacturer | Advanced Dicing Technologies (ADT)[4] | — |
| Tool model | 7122 NEMO[4] | — |
| Spindle | 2-inch, DC-brushless, 1.2 kW, front-mounted, air-bearing spindle[4] | — |
| Maximum spindle speed | 60 krpm max.[4] | — |
| Turntable | Closed-loop turntable[4] | — |
| Maximum product size | Up to 200 mm x 200 mm[4] | — |
| Maximum substrate size | 8 inch[5] | — |
| Voltage | — | 100 V[2] |
| Phase | — | 3 Phase[2] |
| Full Load Current | — | 10 A[2] |
| Largest Load | — | 3 A[2] |
| Interrupting Capacity | — | 14 kA[2] |
| Spindle rated power | — | 4.2 kW[6] |
| Rated torque | — | 5.9 N·m[6] |
| Speed range | — | 1,000 to 7,000 min⁻¹[6] |
| Wafer Sizes | — | 8 inch[6] |
| Vintage | — | 2016[6] |
| Frequency | — | 50/60 Hz[2] |
| Wiring | — | 3 Wire + Ground[6] |
| Control System | — | Original control system and safety guard, touchscreen interface[6] |
| OEM | — | Disco[1] |
| Model | — | DAG 810[1] |
| Machine type | — | Automatic Grinder[1] |
| Option | — | Taiko Option[2] |
| Power supply | — | 100 V, 3 phase, 50/60 Hz[2] |
| Control system | — | Original control system[6] |
| Safety guard | — | Original safety guard[6] |
| Interface | — | Touchscreen interface[6] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →