Comparison ledger
Applied Materials 0010-03254 E Chuck, Edwards QDP 40, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-03254 E ChuckApplied Materials | QDP 40Edwards |
|---|---|---|
| OEM | Applied Materials | Edwards |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Edwards QDP 40 |
| Cited variants | — |
|
| Specifications | ||
| Qty | — | 3[2] |
| Configuration | — | (2) working condition[2] |
| Model | — | QDP 40[2] |
| Manufacturer | — | Edwards[2] |
| Type of product | — | dry pump[3] |
| Inlet connection | — | ISO40[1] |
| Outlet connection | — | NW40[1] |
| Motor rating | — | 2.2 kW[1] |
| Mass | — | 172 kg[1] |
| Warm-up time to nominal performance | — | 15 min[1] |
| Ambient operating temperature range | — | 5 to 40 °C[1] |
| Protection degree | — | IP44[1] |
| Continuous A-weighted sound pressure level (at 1 meter) | — | < 70 dB(A)[1] |
| Typical peak pumping speed, 50 Hz | — | 44 m3/h[1] |
| Typical peak pumping speed, 60 Hz | — | 55 m3/h[1] |
| Typical ultimate vacuum without gas-ballast, 50 Hz | — | 5 x 10-2 mbar[1] |
| Typical ultimate vacuum without gas-ballast, 60 Hz | — | 3 x 10-2 mbar[1] |
| Electrical supply | — | 200-208/380-415 V at 50 Hz, 3-phase; 200-230/460 V at 60 Hz, 3-phase[1] |
| Cooling-water maximum supply pressure | — | 100 psi (6.9 bar absolute)[1] |
| Cooling-water minimum required pressure differential across supply and return | — | 30 psi (2.1 x 10^5 Pa)[1] |
| Cooling-water typical heat removed from pump | — | 1.75 kW[1] |
| Cooling-water maximum particle size in supply | — | 0.03 mm[1] |
| Nitrogen supply fittings type | — | 1/4 inch compression[1] |
| Pump operating temperature at thermal snap-switch position | — | 55 °C, 70 °C, 90 °C[1] |