Comparison ledger
Applied Materials 0720 06060 Part, Chroma 80611, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0720 06060 PartApplied Materials | 80611Chroma |
|---|---|---|
| OEM | Applied Materials | Chroma |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0720 06060 Part | Chroma 80611 |
| Specifications | ||
| Configuration | Contact Pin 24-20 Awg Crimp Gold Flash[1] | — |
| Weight | — | 25 kg (55 lbs)[2] |
| Dimensions (H x W x D) | — | 177 mm x 423 mm x 563 mm (7" x 16.88" x 22")[2] |
| Power Requirement Voltage | — | 115 VAC / 230 VAC (±10%), 60 Hz / 50 Hz[2] |
| Power Requirement Current | — | 1.5 A for 110 VAC, 0.75 A for 230 VAC[2] |
| Max Input Voltage | — | 30 VDC[2] |
| Number of TTL Input Channels | — | 16 bits, standard TTL[2] |
| Number of TTL Output Channels | — | 16 bits, standard TTL[2] |
| Number of Floating Relays | — | 8 pairs[2] |
| Relay Life (Floating Relays) | — | 50,000 cycles at 1800 operations/hour with rated load[2] |
| Relay Current Rating (Floating Relays) | — | 0~2 A[2] |
| Relay Voltage Rating (Floating Relays) | — | 0~220 VDC, 0~250 VAC[2] |
| Noise Card Input Voltage Range | — | 6 V / 30 V / 120 V / 500 V[2] |
| Noise Card Bandwidth | — | 400 kHz[2] |
| Noise Card Resolution | — | 15 bits[2] |
| Product type | — | Timing & Noise Analyzer[2] |
| Maximum noise cards | — | Up to ten 20MHz noise cards[2] |
| Noise card designation | — | 80611N Noise cards[2] |
| Built-in relays | — | 8 pairs of built-in relays[2] |
| TTL control signals | — | 16 bits TTL control signals[2] |
| Low frequency multiplexer | — | Built-in 10 x 4 low frequency multiplexer[2] |
| Expansion slots | — | Two expansion slots for 100MHz high frequency mux cards or 50 channel digital I/O card[2] |
| External trigger sources | — | 6 external trigger sources[2] |
| Triggering options | — | 24 different triggering options[2] |
| VDC input channels | — | Maximum 10 channels for VDC input[3] |
| MUX/EXT input selection | — | 10 MUX/2 EXT/10 VDC input signals[3] |
| Control interface | — | Controlled through Chroma ATS Test Program via GPIB Bus[3] |
| Keypad control | — | No keypad control option[3] |
| General GPIB command control | — | No general GPIB command control option[3] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →