Comparison ledger
Branson 101-149-053 Gold Booster, Hesse & Knipps LW2095, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101-149-053 Gold BoosterBranson | LW2095Hesse & Knipps |
|---|---|---|
| OEM | Branson | Hesse & Knipps |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Branson 101-149-053 Gold Booster | Hesse & Knipps LW2095 |
| Specifications | ||
| Configuration | 1:1.5[1] | — |
| Manufacturer | Branson[2] | — |
| Model | 101-149-053[2] | — |
| Type | Gold Booster[2] | — |
| Operating frequency | 20 kHz[3] | — |
| Gain | 1:1.5[2] | — |
| Mounting thread | 1/2-20[3] | — |
| Length | 5.4 in[3] | — |
| Gain ratio | 1:1.5[2] | — |
| Product type | — | Laser Welder[4] |
| Machine type | — | Fully automatic laser welding system with two weldheads and an extra large working area[5] |
| Working area | — | 2400 mm × 1400 mm × 45 mm (X×Y×Z)[5] |
| P-rotation | — | 360°[5] |
| Laser beam source per weldhead | — | 1.5 kW[5] |
| Beam source max power | — | 1.5 kW, cw[5] |
| Laser beam quality | — | Single Mode[5] |
| Wavelength | — | 1070 nm[5] |
| Optics max working area | — | 12 mm × 12 mm[5] |
| Optics max power | — | 1.3 kW, cw[5] |
| Permissible wavelength | — | 1070 nm[5] |
| Focus spot diameter | — | < 50 µm[6] |
| Down hold force | — | up to 120 N[5] |
| Touchdown detection | — | Included[5] |
| Max. immersion depth | — | 94 mm[5] |
| Process monitoring | — | Sensors for process illumination (plasma, thermal illumination and backscattered radiation)[5] |
| Interfaces | — | OPC-UA, Profinet[5] |
| Footprint | — | 4434 x 3000 x mind. 2460 mm[5] |
| External switch cabinet | — | 1800 x 600 x 2200 mm[5] |
| Laser switch cabinet | — | 600 x 600 x 2000 mm[5] |
| Service stations | — | Tool force calibration module; E-Box station for laser beam alignment; tool changing station; integrated beam shape measurement and focus position determination; off-bond station for welding samples[5] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →