Comparison ledger
Chroma 80611, Rorze 03 RR 8120-001-001 Wafer Exchanger, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 80611Chroma | |
|---|---|---|
| OEM | Chroma | Rorze |
| Category | Test & Probe | Test & Probe |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Chroma 80611 | Rorze 03 RR 8120-001-001 Wafer Exchanger |
| Specifications | ||
| Weight | 25 kg (55 lbs)[1] | — |
| Dimensions (H x W x D) | 177 mm x 423 mm x 563 mm (7" x 16.88" x 22")[1] | — |
| Power Requirement Voltage | 115 VAC / 230 VAC (±10%), 60 Hz / 50 Hz[1] | — |
| Power Requirement Current | 1.5 A for 110 VAC, 0.75 A for 230 VAC[1] | — |
| Max Input Voltage | 30 VDC[1] | — |
| Number of TTL Input Channels | 16 bits, standard TTL[1] | — |
| Number of TTL Output Channels | 16 bits, standard TTL[1] | — |
| Number of Floating Relays | 8 pairs[1] | — |
| Relay Life (Floating Relays) | 50,000 cycles at 1800 operations/hour with rated load[1] | — |
| Relay Current Rating (Floating Relays) | 0~2 A[1] | — |
| Relay Voltage Rating (Floating Relays) | 0~220 VDC, 0~250 VAC[1] | — |
| Noise Card Input Voltage Range | 6 V / 30 V / 120 V / 500 V[1] | — |
| Noise Card Bandwidth | 400 kHz[1] | — |
| Noise Card Resolution | 15 bits[1] | — |
| Product type | Timing & Noise Analyzer[1] | — |
| Maximum noise cards | Up to ten 20MHz noise cards[1] | — |
| Noise card designation | 80611N Noise cards[1] | — |
| Built-in relays | 8 pairs of built-in relays[1] | — |
| TTL control signals | 16 bits TTL control signals[1] | — |
| Low frequency multiplexer | Built-in 10 x 4 low frequency multiplexer[1] | — |
| Expansion slots | Two expansion slots for 100MHz high frequency mux cards or 50 channel digital I/O card[1] | — |
| External trigger sources | 6 external trigger sources[1] | — |
| Triggering options | 24 different triggering options[1] | — |
| VDC input channels | Maximum 10 channels for VDC input[2] | — |
| MUX/EXT input selection | 10 MUX/2 EXT/10 VDC input signals[2] | — |
| Control interface | Controlled through Chroma ATS Test Program via GPIB Bus[2] | — |
| Keypad control | No keypad control option[2] | — |
| General GPIB command control | No general GPIB command control option[2] | — |
| Wafer size | — | 8 inch[3] |
| Manufacturer | — | Rorze[3] |
| Model | — | 03 RR 8120-001-001[3] |
| Equipment type | — | Wafer Exchanger[3] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →