Comparison ledger
Disco DAG 810 Back, Lapmaster 15, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | DAG 810 BackDisco | 15Lapmaster |
|---|---|---|
| OEM | Disco | Lapmaster |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Disco DAG 810 | Lapmaster 15 |
| Specifications | ||
| Phase | 3 Phase[1] | — |
| Configuration | 50/60 Hz[1] | — |
| Full Load Current | 10 A[1] | — |
| Machine Main Breaker Rating | 30 A[1] | — |
| Largest Load | 3 A[1] | — |
| Interrupting Capacity | 14 kA[1] | — |
| Voltage | 200 VAC[2] | — |
| Ampere Rating of Largest Largest Load | 3 A[2] | — |
| Power | 12 kVA[3] | — |
| Frequency | 50/60 Hz[1] | — |
| Wafer Size | 6 inch[2] | — |
| Apparent Power | 12 kVA[3] | — |
| Power Supply | 3 Phase[1] | — |
| Power Consumption | 12 kVA[3] | — |
| Make | Disco[1] | — |
| Model | DAG 810[1] | — |
| Electrical Configuration | 3 Phase[2] | — |
| Vintage | 2012[2] | — |
| Input Power | — | 110 Vac[5] |
| Plate Diameter | — | 15 inches (381 mm)[6] |
| Number of Conditioning Rings | — | 3[6] |
| Ring ID | — | 5.5 inches (140 mm)[6] |
| Standard RPM | — | 60[6] |
| RPM Range (Variable Speed Drive) | — | 0-60[6] |
| Drive Motor - Lapper | — | 0.5 HP (0.37 kW)[6] |
| Drive Motor - Polisher | — | 0.75 HP (0.56 kW)[6] |
| Length | — | 25 inches (635 mm)[6] |
| Width | — | 20 inches (508 mm)[6] |
| Height | — | 24 inches (610 mm)[6] |
| Estimated Shipping Weight | — | 285 lbs (129.3 kg)[6] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →