Comparison ledger
Heller 1707 EXL Reflow Soldering, Mydata MY 12, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | MY 12Mydata | |
|---|---|---|
| OEM | Heller | Mydata |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Mydata MY 12 |
| Specifications | ||
| Make | Heller[1] | — |
| Model | 1707 EXL[1] | — |
| Machine type | Reflow soldering machine / reflow soldering oven[1] | — |
| Vintage | 2005[1] | — |
| Power input | Standard 208/240 VAC 3-phase[2] | — |
| Breaker size | 100 amps @ 480 V[2] | — |
| Optional power inputs | 380/400/440/415/480 VAC[2] | — |
| Frequency | 50/60 Hz[2] | — |
| Overall length | 134 in (340 cm)[2] | — |
| Overall width | 54 in (137 cm)[2] | — |
| Overall height | 63 in (160 cm)[2] | — |
| Typical net weight | 3000 lbs (1360 kg)[2] | — |
| Operating system | Windows XP[2] | — |
| Top heating zones | 7[2] | — |
| Bottom heating zones | 7[2] | — |
| Cooling zones | 1[2] | — |
| Heater type | Instant response open coil[2] | — |
| Heater material | Nichrome[2] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[2] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[2] | — |
| Configuration | — | 50/60 Hz[3] |
| Type | — | pick and place machine[4] |
| Category | — | Assembly / SMT[4] |
| Power / electrical | — | 50/60 Hz[4] |
| Placement rate, standard performance | — | 6,500 CPH[5] |
| HYDRA Speedmount placement rate on chips | — | 21,000 CPH[5] |
| Linescan Vision System placement rate on fine-pitch components | — | 6,100 CPH[5] |
| Accuracy | — | Repeatability of 15 mm at 3 sigma[5] |
| Feeder capacity | — | 144 x 8 mm tapes or 135 SOIC tubes or 112 x 8 mm tapes and 32 JEDEC trays (with TEX)[5] |
| Rated speed | — | 21,000 CPH IPC 9850 chip net throughput 17,500 CPH[6] |
| Fine-pitch rated speed | — | 6,100 CPH IPC 9850 fine pitch net throughput 1,500 CPH[6] |
| Board handling: maximum board size | — | 384 x 508 mm, 563 x 508 mm, 745 x 610 mm, or 932 x 732 mm depending on configuration[6] |
| Machine size | — | 3360 mm length, 1450 mm height, 2000 mm depth, 2134 mm depth, or 2378 mm depth depending on configuration[6] |
| Weight | — | 2100 kg[6] |
| Power requirements | — | Three phase AC 6.6 kVA (3 x 2.2 kVA)[6] |
| Power | — | 50/60 Hz[4] |
| Control software | — | Linux-based TPSys system software[5] |
| Installed options | — | Hydra and Midas Heads, Conveyorized Z High Speed, Electrical Two Pole Test, Autoteach, Electrical Transistor Test[5] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →