Comparison ledger
Heller 1707 EXL Reflow Soldering, Nutek NTM 650 SXXL Multifunction Vertical Buffer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | ||
|---|---|---|
| OEM | Heller | Nutek |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Nutek NTM |
| Specifications | ||
| Make | Heller[1] | — |
| Model | 1707 EXL[1] | NTM 650 SXXL[3] |
| Machine type | Reflow soldering machine / reflow soldering oven[1] | — |
| Vintage | 2005[1] | 2013[3] |
| Power input | Standard 208/240 VAC 3-phase[2] | — |
| Breaker size | 100 amps @ 480 V[2] | — |
| Optional power inputs | 380/400/440/415/480 VAC[2] | — |
| Frequency | 50/60 Hz[2] | — |
| Overall length | 134 in (340 cm)[2] | — |
| Overall width | 54 in (137 cm)[2] | — |
| Overall height | 63 in (160 cm)[2] | — |
| Typical net weight | 3000 lbs (1360 kg)[2] | — |
| Operating system | Windows XP[2] | — |
| Top heating zones | 7[2] | — |
| Bottom heating zones | 7[2] | — |
| Cooling zones | 1[2] | — |
| Heater type | Instant response open coil[2] | — |
| Heater material | Nichrome[2] | — |
| Temperature range | 25-350°C standard; high temperature up to 450°C optional[2] | — |
| Maximum conveyor speed | 74 in/min (188 cm/min)[2] | — |
| Configuration | — | XXL size[3] |
| Phase | — | 1 Phase[3] |
| Direction | — | Left to Right[3] |
| Transfer height | — | 900mm (+/-25mm)[3] |
| PCB size | — | 50 – 535mm (W)/ 80 -850mm (L)[3] |
| Product thickness | — | 0.60 – 1.60mm[3] |
| Component Height | — | Top: 30mm max/ Below: 30mm max[3] |
| Voltage | — | 220V, 50/60Hz[3] |
| Pressure | — | 4-6 Bar[3] |
| Air consumption | — | 2 L/min[3] |
| 3 modes | — | Standard, Reject, Bypass[3] |
| OEM | — | Nutek[3] |
| Type | — | Multifunction Vertical Buffer[3] |
| Size | — | XXL size[4] |
| Operation | — | Open LIFO[4] |
| Modes | — | Standard, Reject, Bypass[3] |
| Component height above | — | 30mm max[3] |
| Component height below | — | 30mm max[3] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →