ESPEC

The ESPEC 212M is an environmental test chamber model documented in two user manuals on MetrologyManuals.

The ESPEC ESL 4 CA Environmental is an environmental chamber manufactured by ESPEC.

The ESPEC LHU-113 is a service manual-listed environmental-test equipment model. The available source identifies ESPEC as a manufacturer of chambers and systems for reproducing temperature, humidity, thermal shock, pressure, and other environmental stresses.

ESPEC TSA 101 S W is a thermal shock chamber with AC 200V three-phase power, a 5.5 kW refrigeration motor, and a 6 kW heater.

The ESPEC EHS 221 M HAST is a HAST system manufactured by ESPEC, and no technical specifications for it have been recorded in publicly available sources.

The ESPEC LHU-113 is a temperature and humidity cabinet designed for environmental testing.

The ESPEC BTZ-4200 is a compact temperature cycling chamber with a fast 15°C/min change rate and wide temperature range of -70 to 180°C.

The ESPEC SH 241 is an environmental chamber that uses 1 phase, 120 V, 60 Hz and was manufactured in 2004.

The ESPEC EHS 211 M has a temperature range of +105.0 to +142 °C, a humidity range of 75-100%, and a pressure range of 0.020 to 0.196 MPa.

The ESPEC ENZ 12-4 CAL Temperature is a temperature chamber manufactured by ESPEC, with a vintage of 2006.

The PV(H)-212 is an ESPEC CORP. model documented with one service manual, from a Japanese manufacturer of environmental-test chambers and systems.

The ESPEC PH 101 is an oven in the Thermal / Diffusion category.

ESPEC ST 120 is a thermal/diffusion oven manufactured by ESPEC.

The ESPEC PVHC 211 M is an oven in the Thermal / Diffusion category.

ESPEC TSE 11 A is a thermal shock experimental machine rated for 200 V, 3 phase, 50/60 Hz.

The ESPEC TSA 170 L Thermal Shock is a thermal shock chamber manufactured by ESPEC; no specifications are on record for the ESPEC TSA 170 L Thermal Shock.

The ESPEC TSB 2 is a liquid-to-liquid thermal shock chamber.

The ESPEC BTL-433 is a 4 cubic foot (110 liter) benchtop temperature and humidity chamber from the Criterion Benchtop series.

The ESPEC PR 3 KP is a temperature/humidity chamber with a temperature range of -20 to +100°C and humidity range of 20 to 98%rh.

The ESPEC CR 220 is a climatic test chamber.

The ESPEC ETC 200 L Thermal is a thermal chamber identified by model ETC 200 L.

The ESPEC ECT 3 Temperature is a temperature chamber. The ESPEC ECT 3 Temperature operates at 115V with an 18 amp full load and uses a Watlow F4 Controller.

The ESPEC Tabai Humidity is a humidity chamber.

The ESPEC TSE-12-A is a compact vertical-lift thermal shock chamber with separate hot and cold zones, a temperature range of -65°C to 200°C, and an interior volume of 0.4 cubic feet.

The ESPEC BTX-475 is a model for which a datasheet is available.

The ESPEC EGNZ 28 12 WI is an oven categorized under Thermal/Diffusion equipment for semiconductor manufacturing.

The ESPEC ESL 3 CW Reliability is an ESPEC chamber model.

The ESPEC PR 4 J is a constant temperature and humidity chamber with a temperature range of -20°C to +100°C, manufactured in 2015.

The ESPEC LHL 113 is a constant temperature machine manufactured in 2010.

The ESPEC TSA 203 EL W is a thermal shock chamber with high temp exposure range of +50 to +200°C and low temp exposure range of -65 to 0°C.

The ESPEC PH 402 is an environmental chamber described as a horizontal-type industrial oven.

The ESPEC BTZ 175 is a Criterion benchtop chamber. The ESPEC BTZ 175 is specified with a temperature range and electrical load ratings in the provided sources.

The ESPEC TSB 5 A Environmental is an environmental chamber.

The ESPEC EHS-211 is a service manual-listed highly accelerated stress test system and HAST chamber.

ESPEC EGNL 286 WWL is a chamber with a Watlow controller, humidity control up to 100% RH, and a temperature range from -40C to 120C.

The ESPEC TSE 11 A is a thermal shock chamber.

The ESPEC TSA 71 S is a thermal shock chamber.

The ESPEC ESL 3 CW is an environmental chamber.

The ESPEC SH 242 Environmental is a bench-top environmental test chamber with a temperature range of -40°C to +150°C and a humidity range of 30% to 95% RH.

The ESPEC PVC 332 is an annealing oven described as a 3-phase, 50/60 Hz, 200V unit.

The ESPEC TSE-12 is a thermal shock chamber that is the smallest 15°C/m fast cycling chamber, based on benchtop models, and requires only electricity.

The ESPEC TSE-12-A is a thermal shock chamber used for reliability testing.

The ESPEC TSD-101-W is a thermal shock chamber listed by ESPEC as the next larger model after the TSE-12-A.

The ESPEC TSE-11 is a model of environmental testing equipment manufactured by ESPEC CORP.