Genmark
GB 8 MT 80050102 Atmospheric Wafer Handling Robot
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedAn atmospheric wafer handling robot transfers wafers between process modules, load ports, and other handling stations in air rather than in vacuum. A robot of this class uses a mechanical arm assembly to pick up a wafer and place it at a target location with controlled motion and repeatable positioning.
A dual arm configuration can move wafers between two endpoints without manual transfer, while a single arm configuration uses one handling arm for the same general transport function. The robot class is normally integrated with semiconductor tools that need automated wafer movement at atmospheric pressure.
Where it fits in the process flow
General reference — not yet source-verifiedThe machine is used where automated transfer is needed between atmospheric stations in a fabrication flow. The class supports wafer routing around process tools, aligners, prealignment stations, and other handling interfaces.
Applications
General reference — not yet source-verifiedThe robot is suitable for atmospheric wafer transfer tasks in mature-node and legacy fab support contexts where automated wafer movement is required outside a vacuum environment.
What do the numbers mean?
Wafer handling5
Configuration & options6
- Dual Arm[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the GB 8 MT 80050102 Atmospheric Wafer Handling Robot are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the GB 8 MT 80050102 Atmospheric Wafer Handling Robot are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the GB 8 MT 80050102 Atmospheric Wafer Handling Robot are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the GB 8 MT 80050102 Atmospheric Wafer Handling Robot are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the GB 8 MT 80050102 Atmospheric Wafer Handling Robot are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the GB 8 MT 80050102 Atmospheric Wafer Handling Robot is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]inventory listing
- [2]asseta.com — asseta.comasseta.com
- [3]fabsurplus.com — fabsurplus.comfabsurplus.com
Last updated Oct 13, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.