Juki
CX 1 Placement
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Juki CX-1 placement system is a high-accuracy SMT placement machine designed for advanced package types such as SiP and MCM. The CX-1 is built on a standard SMT machine base but uses highly accurate glass linear encoders and special calibration software. The CX-1 offers two operating modes: a high-accuracy mode with speeds up to 1,600 cph (laser) and a standard mode at 11,000 cph.[1]
What it is
How it works
The CX 1 features the High Measurement System II (HMS II) to measure board surface height and flatness, as well as placement flatness and placement force control.[1]
The CX 1 comes standard with four placement heads capable of laser and vision centering, with independent X and theta motors.[1]
The CX 1 can handle boards up to 330 x 250 mm and features a standard 27 mm field-of-view (FOV) high-resolution camera.[1]
The CX 1 offers two modes: high accuracy and standard accuracy.[1]
The CX 1 uses special software that periodically checks and calibrates to ensure accuracy.[1]
Where it fits in the process flow
Applications
What do the numbers mean?
Optics & imaging3
- Placement heads
- 4 heads, capable of laser/vision centering, independent x and theta motors[1]
Performance3
Control & software2
Configuration & options4
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the CX 1 Placement are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the CX 1 Placement are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the CX 1 Placement are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the CX 1 Placement are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the CX 1 Placement are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the CX 1 Placement is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]circuitsassembly.com — circuitsassembly.comcircuitsassembly.com
- [2]Equipment inventory listing
Last updated Aug 20, 2026.
