Juki
Feeder Setup
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Juki Feeder Setup Station is a feeder calibration and setup platform for JUKI FX-1R SMT placement machines. The Juki Feeder Setup Station is used to test, adjust, and maintain electric feeders before production. The Juki Feeder Setup Station is on locking casters.[1][2]
What it is
The Juki Feeder Setup Station is an SMT feeder setup platform used with JUKI placement equipment. The station supports feeder calibration and setup before production.[1]
How it works
The Juki Feeder Setup Station is used to test, adjust, and maintain electric feeders before production. The station supports tape alignment and feeder feeding performance checks.[1]
The feeder setup rack holds feeders in position during setup and changeover. The rack is intended to keep feeders protected and organized while operators prepare them for use on placement machines.[3]
Where it fits in the process flow
The Juki Feeder Setup Station sits upstream of SMT placement. The station prepares feeders before they are loaded into production equipment.[1]
Applications
The Juki Feeder Setup Station is used for SMT maintenance workshops and production lines. The equipment supports feeder calibration, feeder setup, and feeder handling for JUKI SMT placement systems.[1]
What do the numbers mean?
Configuration & options10
- on Locking Casters[2]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What feeder types does the rack support?
The rack supports Juki 700 NF and FF feeders and Juki 2000 CTF feeders.[3]
How many feeders does the rack hold?
The rack holds one feeder of any width.[3]
What handling purpose does the rack serve?
The rack is used for feeder setup, staging, and changeover work around pick-and-place machines.[3]
Not publicly documented
The following facts about the Feeder Setup are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Feeder Setup are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the Feeder Setup are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the Feeder Setup are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Feeder Setup are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Feeder Setup is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]rhsmt.com — rhsmt.comrhsmt.com
- [2]Inventory photo
- [3]FEEDER SETUP RACK, JUKI 700 NF & FF, 2000, CF, CTF – U.S. Standard Industrial Workbenches, Safe Carts, Racks, Chairs & 1000s of Accessories | J&A Industries — jnaindustries.comjnaindustries.com
Last updated Oct 11, 2026.
Compare with similar tools
View all →The ASM DEK NeoHorizon iX SMT is an automatic SMT solder paste screen printer with a touchscreen and keyboard operator interface.
The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
