Juki

P Primo

Q: What cleaning modes are available on the Juki P Primo?

The Juki P Primo includes auto wet, dry, and vacuum cleaning selectable by software.

Research Quality: 40% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Juki P Primo is a large-platform SMT screen printer. The Juki P Primo handles boards up to 850 mm x 610 mm. The Juki P Primo uses a Windows 7 or higher operating system.^[1]^[2]

P Primo — Inventory photo — Fig. 01P PrimoInventory photo^[3]

Power

220 V^[3]

Vacuum

0.5~10 kg^[1]

Performance

±25 microns @ 4 sigma^[1]

How it works

The Juki P Primo uses an optical system with CCD vision technology. The Juki P Primo uses CCD camera look up and down vision methodology. The Juki P Primo supports fiducial recognition for circle, triangle, square, diamond, and cross marks with fiducial sizes from 0.5 mm to 4.0 mm. The Juki P Primo provides automatic PCB thickness adjustment. The Juki P Primo includes auto wet, dry, and vacuum stencil cleaning selectable by software. The Juki P Primo provides 2D inspection with up to 100 windows for checking missing and insufficient paste in one specification set.^[1]

What do the numbers mean?

Power & electrical3

Voltage: 220 V^[3]
Power supply: AC220V ± 10% 50/60Hz^[2]
Power consumption: 3 kW^[1]

Vacuum & pumping2

Squeegee pressure: 0.5~10 kg^[1]
Cleaning system: Auto wet, dry, vacuum (software select)^[1]

Performance2

Process alignment capability: ±25 microns @ 4 sigma^[1]
Machine alignment capability: 2Cmk @ ±12.5 microns @ 4 sigma^[1]

Control & software2

Operating system: Windows 7 or higher^[1]
Operating system: Windows 7^[2]

Dimensions & facilities3

PCB max weight: 10 kg^[1]
Dimensions: 1,590 mm (L) x 1,608 mm (W) x 1,530 mm (H)^[1]
Machine weight: 1,400 kg^[1]

Configuration & options17

Power: 3 kVA^[3]
Equipment type: SMT screen printer^[1]
Board size range: 100 mm x 65 mm to 850 mm x 610 mm^[1]
Maximum board size: 850 mm x 610 mm^[1]
Board thickness: 0.4~8 mm^[1]
Core cycle time: <12 secs^[1]
Product changeover time: <5 secs^[1]
New product setup time: <10 secs^[1]
Air supply: 4~6 Kgf/cm2^[1]
Stencil frame size: 737 mm x 737 mm to 1,100 mm x 850 mm^[1]
Print gap (snap-off): 0~20 mm^[1]
Printing table adjustment range: X:±10 mm, Y:±10 mm, :±2°^[1]
Print speed: 5~150 mm/s^[1]
Field of view: 8 mm x 6 mm^[1]
Fiducial types: circle, triangle, square, diamond, cross^[1]
Fiducial size: 0.5~4.0 mm^[1]
2D inspection: Max. 100 windows to inspect missing & insufficient (std.)^[1]

Observed configurations

How individual machines were equipped when they appeared on the secondary market — as listed, per unit. These describe one specific machine, not the model in general.

Unit as listed^[3]

220 V
Single Phase
3 kVA
Comp Air

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Voltage220 V^[3]
Power supplyAC220V ± 10% 50/60Hz^[2]
Power consumption3 kW^[1]
Squeegee pressure0.5~10 kg^[1]
Cleaning systemAuto wet, dry, vacuum (software select)^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What cleaning modes are available on the Juki P Primo?

The Juki P Primo includes auto wet, dry, and vacuum cleaning selectable by software.^[1]

Not publicly documented

The following facts about the P Primo are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the P Primo are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the P Primo are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the P Primo are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the P Primo are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the P Primo is not on record.
Answerable by: an OEM datasheet or a fab qualification report