MPM
MPM 125
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The MPM 125 is an automated stencil printer designed for solder paste printing on PCBs. The MPM 125 features a maximum board size of 609.6 mm x 508 mm and a system alignment accuracy of ±12.5 microns at 6 sigma. The MPM 125 achieves a print speed up to 305 mm/sec and a cycle time of 13 seconds.[1][2]
Where it fits in the process flow
The MPM 125 can handle boards up to 609.6 mm by 508 mm (24 by 20 inches) and as small as 50.8 mm by 50.8 mm (2 by 2 inches). Board thickness can range from 0.2 mm to 5.0 mm. The machine supports various board hold-down methods including fixed top clamps and centernest vacuum.[1]
Applications
The MPM 125 includes a paste dispenser that uses industry-standard sealed cartridges to release precise amounts of solder paste, adhesive, flux, encapsulants, or ink. The machine also incorporates expanded 2D inspection with BridgeVision and StencilVision for pad-level and device-level inspection.[1]
What do the numbers mean?
Power & electrical1
Vacuum & pumping1
- Air Supply Requirements
- 100 psi at 4 cfm (standard) to 18 cfm (vacuum wipe) (7 bar @ 5 L/s to 12 L/s), 12.7 mm diameter line[1]
Optics & imaging1
Performance1
Control & software1
Dimensions & facilities8
Configuration & options9
- Board Thickness
- 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp[1]
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| MPM 125+ | — | 2012 | Model designation MPM125+ | smtnet.com[3] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the system alignment accuracy of the MPM 125?
The MPM 125 has a total system alignment accuracy of ±12.5 microns at 6 sigma with Cpk greater than or equal to 2.0.[1]
What is the cycle time of the MPM 125?
The cycle time is 13 seconds.[1]
What are the maximum and minimum board sizes the MPM 125 can handle?
Maximum board size is 609.6 mm x 508 mm (24 x 20 inches) and minimum board size is 50.8 mm x 50.8 mm (2 x 2 inches).[1]
What is the maximum print speed of the MPM 125?
Print speed is up to 305 mm/sec (12.0 inches/sec).[1]
What are the power and air supply requirements for the MPM 125?
Power requirements are 200 to 240 VAC single phase at 50/60 Hz, 15 A. Air supply requires 100 psi at 4 cfm (standard run) to 18 cfm (vacuum wipe), with a 12.7 mm diameter line.[1]
Not publicly documented
The following facts about the MPM 125 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the MPM 125 are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the MPM 125 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the MPM 125 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the MPM 125 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the MPM 125 are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]anubiss.nl — anubiss.nlanubiss.nl
- [2]https://www.feedersmt.com/speedline-mpm-125-printer/ — feedersmt.comfeedersmt.com
- [3]smtnet.com — smtnet.comsmtnet.com
- [4]Equipment inventory listing
Last updated Aug 16, 2026.
