Mydata
My300
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Mydata My300 is a pick-and-place/feeder machine in the Mydata SMT/PCB assembly equipment line. The My300 is categorized by the marketplace alongside the Mydata My200 and My100 models.[1]
Plate 01Mycronic MY300 pick & place - self made video
LM InstrumentsWatch on YouTubePlate 02The My300
Advanced AssemblyWatch on YouTubePlate 03Mycronic MY300.
Gia Đình Nhà Huỳnh - Cuộc Sống MỹWatch on YouTubePlate 04Mycronic MY300 pick & place - self made video
Danutek Hungary Kft.Watch on YouTube
What it is
General reference — not yet source-verifiedPick-and-place machines are assembly systems that place surface-mount components onto printed circuit boards. Pick-and-place machines are used in SMT production lines to automate component handling, alignment, and placement before soldering.
How it works
General reference — not yet source-verifiedPick-and-place equipment generally picks parts from feeders or trays, identifies the parts with vision, and places them at programmed locations on prepared boards. Pick-and-place equipment generally operates after paste deposition and before solder reflow, with board transport through manual or inline handling.
Where it fits in the process flow
General reference — not yet source-verifiedIn an SMT line, pick-and-place systems receive assembled boards from upstream printing or preparation steps and pass populated boards to downstream soldering and inspection steps. Pick-and-place systems are commonly integrated with conveyors, material control, and traceability software within the assembly flow.
Applications
General reference — not yet source-verifiedPick-and-place machines are used to assemble electronic boards that carry surface-mount components. Pick-and-place machines are suited to mixed product environments, prototype work, and recurring production where placement accuracy, feeder management, and traceability are important.
- PCB assembly
- Pick and place/feeders
- SMT equipment
What do the numbers mean?
Configuration & options14
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| MY300DX | — | — | High-speed all-in-one mounter with up to 224 feeder positions and a top speed of 40,000 components per hour. | mycronic.com[2] |
| MY300SX | — | — | Flexible all-in-one mounter with up to 192 feeder positions and a top speed of 24,000 components per hour. | mycronic.com[2] |
What replaced it?
Related models
- siblingMydata My100— Listed together with My100 in marketplace listings.source[1]
- siblingMydata My200— Listed together with My200 in the same pick-and-place grouping.source[1]
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of equipment is the Mydata My300?
The Mydata My300 is SMT and PCB assembly equipment.[1]
Not publicly documented
The following facts about the My300 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the My300 are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the My300 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the My300 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the My300 is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the My300 are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (3)Every fact above is drawn from these public sources
- [1]smtnet.com — smtnet.comsmtnet.com
- [2]mycronic.com — mycronic.commycronic.com
- [3]rothmeier-smt.derothmeier-smt.de
Last updated Oct 19, 2026.
Compare with similar tools
View all →The ASM DEK NeoHorizon iX SMT is an automatic SMT solder paste screen printer with a touchscreen and keyboard operator interface.
The Dek 03 iX Automatic is an automatic paste printer used in surface-mount technology assembly.
