Neslab
HX 900 Chiller
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Neslab HX 900 Chiller is a recirculating chiller. The Neslab HX 900 Chiller is designed to provide a continuous flow of cooling fluid at a constant temperature and volume. The Neslab HX 900 Chiller is specified with a temperature range of +5°C to +35°C.[1]
What it is
The Neslab HX 900 is a recirculating chiller. The HX Recirculating Chiller is designed to provide a continuous flow of cooling fluid at a constant temperature and volume. The unit consists of a refrigeration system, a fluid reservoir, a fluid recirculation pump, and a temperature controller. The refrigeration system can be configured as air cooled or water cooled.[1][2]
What do the numbers mean?
Power & electrical3
Vacuum & pumping1
Dimensions & facilities6
Configuration & options8
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What temperature range does the Neslab HX 900 provide?
The Neslab HX 900 temperature range is +5°C to +35°C.[1]
What cooling capacity is specified for the Neslab HX 900?
The Neslab HX 900 cooling capacity is 38,000 watts when circulating water at 25°C and 20°C ambient. The specified cooling capacity for 50 hertz units is 31,500 watts.[1]
What pumping capacity is specified for the Neslab HX 900?
The Neslab HX 900 pumping capacity is 35 gpm at 45 psi.[1]
What are the dimensions and weight of the Neslab HX 900?
The Neslab HX 900 air-cooled unit dimensions are 63¾ x 46 x 29 inches, or 162.0 x 116.8 x 73.6 centimeters. The Neslab HX 900 water-cooled unit dimensions are 50⅝ x 46 x 28¾ inches, or 128.3 x 116.8 x 73.0 centimeters. The Neslab HX 900 weight is 1250 pounds, or 567 kilograms.[1]
Not publicly documented
The following facts about the HX 900 Chiller are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the HX 900 Chiller are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the HX 900 Chiller are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the HX 900 Chiller are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the HX 900 Chiller are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the HX 900 Chiller is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]chillercity.com — chillercity.comchillercity.com
- [2]Inventory photo
Last updated Oct 20, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.