Samsung
CP 45 FV
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
General reference — not yet source-verifiedThe Samsung CP 45 FV is a pick and place machine used in surface-mount technology (SMT) assembly lines.
How it works
The CP 45 FV uses both flying vision and stage vision for component alignment.[2]
Where it fits in the process flow
General reference — not yet source-verifiedIn an SMT assembly line, the pick and place machine follows the solder paste printer and precedes the reflow oven.
The CP 45 FV receives PCBs that have had solder paste applied, places components onto the paste, and then sends the populated boards to the reflow oven for soldering.
Applications
The CP 45 FV NEO can place components from 0201 chip resistors up to large QFPs, BGAs, and CSPs, making it suitable for complex, mixed-technology boards.[1]
What do the numbers mean?
Optics & imaging2
- Component Dimensions (Flight Camera)
- 1005 (0402) ~ □ 22mm IC, 0603 (0201) ~ □ 12mm (Option)[2]
Performance3
Configuration & options8
Vintage & configurations
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the mounting accuracy of the CP45FV NEO?
The mounting accuracy for a 0603 chip is ±0.08 mm, for a 1005 chip it is ±0.1 mm, and for a QFP it is ±0.04 mm.[2]
What is the maximum PCB size the CP45FV NEO can handle?
The standard PCB size is 460 mm by 400 mm by 4.2 mm.[2]
What component sizes can the CP45FV NEO place?
With flying vision it can place 1005 to 22 mm ICs, with the standard fixed camera up to 32 mm ICs, and with a special fixed camera up to 42 mm ICs. Minimum ball pitch for BGA is 0.5 mm with the FOV20 camera.[2]
What types of vision systems does the CP45FV NEO use?
The machine uses both flying vision and stage vision.[2]
Not publicly documented
The following facts about the CP 45 FV are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the CP 45 FV are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the CP 45 FV are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the CP 45 FV are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the CP 45 FV is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the CP 45 FV are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]smtinnovation.com — smtinnovation.comsmtinnovation.com
- [2]flason-smt.com — flason-smt.comflason-smt.com
- [3]manualslib.com — manualslib.commanualslib.com
- [4]Equipment inventory listing
Last updated Sep 1, 2026.
