Thermo Fisher
HP 131725 Hot Plate
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Thermo Scientific HP 131725 Hot Plate is a hot plate. The Thermo Scientific HP 131725 Hot Plate has a 7 inch by 7 inch work area. The Thermo Scientific HP 131725 Hot Plate is specified at 370°C and 120V, 60Hz.[1]
What it is
General reference — not yet source-verifiedA laboratory hot plate is a benchtop heating device used to raise and hold the temperature of samples, vessels, or substrates placed on its heated surface. Hot plates in semiconductor and technical laboratory settings support preparation, conditioning, and thermal hold steps for materials and small parts.
How it works
General reference — not yet source-verifiedA hot plate transfers heat from a temperature-controlled flat surface into the item resting on that surface. A hot plate typically uses an internal heater and control loop to reach a set temperature and maintain it during a process hold.
Where it fits in the process flow
General reference — not yet source-verifiedHot plates are support tools rather than primary patterning or deposition tools. Hot plates are commonly placed around coating, cleaning, preparation, and inspection workflows wherever a manual or batch thermal step is needed between major process operations.
Applications
General reference — not yet source-verifiedHot plates are used for drying, warming, and controlled heating of laboratory vessels, samples, and small substrates. In technical process environments, hot plates can support bake, solvent evaporation, sample conditioning, and general laboratory thermal treatment tasks.
What do the numbers mean?
Power & electrical2
Configuration & options5
- 7" X 7" Work area[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the HP 131725 Hot Plate are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the HP 131725 Hot Plate are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the HP 131725 Hot Plate are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the HP 131725 Hot Plate are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the HP 131725 Hot Plate are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the HP 131725 Hot Plate is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]inventory listing
Last updated Oct 16, 2026.
Compare with similar tools
View all →
The Applied Materials 0010-13627 is a high efficiency RF match designed for semiconductor equipment.
General referenceThe Applied Materials 0015 20064 Part is an identified component within the lab and support equipment category, used in a supporting role around semiconductor manufacturing and processing tools.
Applied Materials 0020 19652 is a retainer bracket, top match part described as for 200mm Ultim.