Comparison ledger
KLA 2351 and KLA Candela CS 20 V, side by side. Every value shown is drawn from its cited encyclopedia entry.
| Attribute | 2351KLA | |
|---|---|---|
| OEM | KLA | KLA |
| Category | Metrology & Inspection | Metrology & Inspection |
| Wafer size | Wafer Transfer System | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | KLA 2351 | KLA Candela CS 20 |
| Specifications | ||
| Configuration | With HDD & Software[1] | 50/60 Hz[3] |
| Load Port Qty | 2[1] | — |
| Wavelength Illumination | 370~720 nm[1] | — |
| Wavelength Band | Visible, UV[1] | — |
| Pixel Size | 0.16μm / 0.20μm / 0.25μm / 0.39μm / 0.62μm[1] | — |
| Array Defect Capture Rate | ≥90% (0.16 um, 0.20 um, 0.25 um, 0.39 um, 0.62 um sensitivities)[1] | — |
| Array False Defect Rate | ≤1.5%(all sizes)[1] | — |
| Random Defect Capture Rate | ≥90% (0.16 um, 0.20 um, 0.25 um, 0.39 um, 0.62 um sensitivities)[1] | — |
| Random False Defect Rate | ≤1.5% (all sizes)[1] | — |
| Repeatability | ≥90% (20 consecutive run on the same DSW wafer)[1] | — |
| Wafer size | Wafer Transfer System[1] | — |
| Voltage | — | 230 VAC[3] |
| Phase | — | 3 Phase[3] |
| Chuck | — | 2-5"[4] |
| Wafer sizes | — | 4-inch and 6-inch[5] |
| Chuck sizes | — | 4-inch and 6-inch[5] |
| Software vs | — | Candela Wafer Version 6.8 Build 16[5] |
| Laser specs | — | 405 nm oblique-incidence laser and 660 nm normal-incidence laser[5] |
Plan your fab
Building a Metrology & Inspection process? Get a complete equipment list.
Open the fab equipment planner →