29 entries
- CACE 4060 B ConveyorFuji
The Fuji CACE 4060 B Conveyor is a conveyor unit with 100 CM and 50 CM lengths, 100V supply voltage, 5A full load amp, 50/60Hz, and single-phase operation.
- SG 6 ATCM 402 H 4 Pnuematic BlasterFuji
- NXT II PlacementFuji
- 24 MM FeederFuji
- GL-V 91-38292Fuji
- Electric ZRH 1 DFY 2 6 BAYY AnalyzerFuji
Fuji Electric ZRH 1 DFY 2 6 BAYY Analyzer is an analyzer with CO2 measurement, a 0 to 1000 ppm measuring range, a 0 to 1 V DC output signal, and 115 V, 50/60 Hz power.
- NXT H PlacementFuji
- NXT I M 3 S TU-M Tray FeederFuji
- NXT I M 3 S FeedersFuji
- NXT M 3 III TrayFuji
- NXT M 3 III Chip MounterFuji
- XP 424 EFujiCategoryAssembly / SMT
- XP 242 EFujiCategoryAssembly / SMT
- LT 2 PlacementFuji
- 12 MM FeederFuji
- 8 MM FeederFuji
- NXT M 3 III PlacementFuji
- NXT M 6FujiCategoryAssembly / SMT
- NXT M 3FujiCategoryAssembly / SMT
- NXTFujiCategoryAssembly / SMT
- CP 642 Chip ShooterFuji
- Electric VFC 400 A 7 W Ring CompressorFuji
- XP 143 E PlacementFuji
- NXT III PlacementFuji
- FW 3400 CXII B Horizontal Flow WrapperFuji
Fuji FW 3400 CXII / B is a horizontal flow wrapper with single roll, top film feed, adjustable formers, induction heated sealing rollers, box-motion end sealers, up to 300 packs per minute, and a user-friendly HMI.
- LGC 4020 B Gate ConveyorFuji
Fuji LGC 4020 B Gate Conveyor is a 1-phase conveyor rated at 50/60 Hz with a full load current of 10A.
- NXT M 3 IIIFuji
The Fuji NXT M 3 III is a pick and place machine configured as a 2 M Base and 4 M Base system with dual-lane or single-lane operation and H 24 S, H 24 G, or H 24 head options.
CategoryAssembly / SMT - GL-V GlueFuji
- Aimex PlacementFujiCategoryAssembly / SMT
