Fuji

CP 642 Chip Shooter

Research Quality: 40% complete

The Fuji CP 642 Chip Shooter is a high-speed SMT chip placement machine with a rated speed of 40,000 components per hour. The Fuji CP 642 achieves a placing accuracy of ±0.01mm (3σ) and handles components from 0402 to 19mm x 20mm.^[1]

CP 642 Chip Shooter — Inventory photo — Fig. 01CP 642 Chip ShooterInventory photo^[2]

Power

300+ spares (servos, amps, cards, etc)^[2]

Performance

±0.01mm (3σ)^[1]

What it is

The CP 642 has a rated placement speed of 40,000 components per hour (CPH) and can place components ranging from 0402 to 19 by 20 millimeters in size with an accuracy of plus or minus 0.01 millimeters.^[1]

What do the numbers mean?

Power & electrical2

300+ spares (servos, amps, cards, etc)^[2]
Power: 3 phase 200 to 480 VAC, 10 kVA (1.25 kVA in power saving mode)^[1]

Performance1

Placing Accuracy: ±0.01mm (3σ)^[1]

Control & software1

2 Fuji MCS30 programming computers^[2]

Accurate?

Dimensions & facilities5

PCB Dimensions Max: 457mm x 356mm^[1]
PCB Dimensions Min: 80mm x 60mm^[1]
Maximum Component Height: 6mm^[1]
Machine Dimensions (L x W x H): 4840mm x 1690mm x 1780mm^[1]
Weight: Approx. 6000 kg^[1]

Configuration & options10

With:^[2]; low hours^[2]; 500+ feeders^[2]
Rated Speed: 40,000 CPH^[1]
Placing Rate: 0.09 sec/component^[1]
Board Thickness: 0.3 to 4.0mm^[1]
Component Capacity: Up to 140 types (8mm tape)^[1]
Applicable Components: 0402 to 19mm x 20mm^[1]
Air Supply: 0.5 MPa (5 kgf/cm²)^[1]
Vintage: 1997^[2]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

Configuration300+ spares (servos, amps, cards, etc)^[2]
Power3 phase 200 to 480 VAC, 10 kVA (1.25 kVA in power saving mode)^[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the power requirement of the Fuji CP 642?

The machine requires three-phase 200 to 480 VAC power at 10 kVA, with 1.25 kVA in power saving mode.^[1]

Not publicly documented

The following facts about the CP 642 Chip Shooter are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the CP 642 Chip Shooter are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the CP 642 Chip Shooter are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the CP 642 Chip Shooter are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the CP 642 Chip Shooter are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the CP 642 Chip Shooter is not on record.
Answerable by: an OEM datasheet or a fab qualification report