Agilent
7700 ICP-MS
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Agilent 7700 ICP-MS is an inductively coupled plasma mass spectrometer. The Agilent 7700 ICP-MS is used for elemental analysis and trace-element detection. The Agilent 7700 ICP-MS uses a 3rd-generation Octopole Reaction System (ORS3).[1][2]
What it is
General reference — not yet source-verifiedAn ICP-MS is an analytical instrument that converts elements in a prepared liquid sample into ions and then separates those ions by mass. ICP-MS tools are used in laboratories that need very low level elemental contamination measurements in chemicals, water, and digested materials.
How it works
General reference — not yet source-verifiedICP-MS systems typically rely on sample introduction hardware that produces a fine aerosol, a plasma source that atomizes and ionizes the sample, an interface that transfers ions from atmospheric pressure into vacuum, and a mass analyzer with a detector that converts ion flux into analytical signals. Collision or reaction cells in this class of instrument are used to reduce spectral interferences so that target elements can be measured more selectively.
Where it fits in the process flow
General reference — not yet source-verifiedIn semiconductor process support, ICP-MS is used off-line rather than as an in-line wafer processing tool. ICP-MS is typically placed in analytical or quality laboratories that verify incoming chemicals, ultrapure water, and process-related solutions before those materials are released to production or used in failure analysis and contamination investigations.
Applications
General reference — not yet source-verifiedIn fab-related analytical workflows, ICP-MS is commonly applied to contamination control, raw-material qualification, and root-cause analysis. The technique is suited to dissolved samples and digests rather than direct wafer pattern inspection or lithographic metrology.
What do the numbers mean?
Power & electrical3
Gas & chemistry1
Configuration & options5
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| 7700x | — | — | Adds High Matrix Introduction (HMI) as a standard feature for routine analysis of high-matrix samples without dilution. | gentechscientific.com[2] |
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 7700 ICP-MS are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 7700 ICP-MS are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the 7700 ICP-MS are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 7700 ICP-MS are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 7700 ICP-MS is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the 7700 ICP-MS are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]Agilent 7700 ICP-MS – Global Technologies — global-tech.usglobal-tech.us
- [2]gentechscientific.com — gentechscientific.comgentechscientific.com
- [3]Inventory photo
- [4]Inventory photo
- [5]Inventory photo
Last updated Oct 20, 2026.
Compare with similar tools
View all →
The OGP 0020 Contour Projector is a precision optics contour projector made by OGP (Optical Gaging Products).
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.