Waferpedia

F&K Delvotec

G 5 62000

G 5 62000 — Inventory photo
Fig. 01G 5 62000Inventory photo[1]

Power

100-120 / 200-240 V, 0.6 kVA[1]

Vacuum

Vacuum based[1]

What is it?

The F&K Delvotec G 5 62000 is a wire bonder described as running with 25 µm wire and a ball/wedge bondhead.

What do the numbers mean?

Power & electrical3

100-120 / 200-240 V, 0.6 kVA[1]
Accurate?
Phase
50/60 Hz, Phase 5, 2.5 A[1]
Accurate?
120 kHz Transducer[1]
Accurate?

Vacuum & pumping1

Vacuum based[1]
Accurate?

Configuration & options5

Gold Ball[1]
Accurate?
Ball/Wedge Bondhead[1]
Accurate?
Running with 25 µm wire[1]
Accurate?
PCB
70 µm minimum pad size[1]
Accurate?
90 degrees[1]
Accurate?
Interested in this tool?
Embed spec card

What replaced it?

Alternatives

Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • Configuration100-120 / 200-240 V, 0.6 kVA[1]
  • Phase50/60 Hz, Phase 5, 2.5 A[1]
  • Configuration120 kHz Transducer[1]
  • ConfigurationVacuum based[1]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Not publicly documented

The following facts about the G 5 62000 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the G 5 62000 are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • No publicly documented variants, configuration options, or revision breakpoints of the G 5 62000 are on record.

    Answerable by: an OEM product catalog or an engineer who ordered or specified the tool

  • The control-system platform and OS era of the G 5 62000 are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the G 5 62000 are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the G 5 62000 is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (2)Every fact above is drawn from these public sources
  1. [1]Inventory photo
  2. [2]Equipment inventory listing
Was this page accurate?

Last updated Jul 29, 2026.

Compare with similar tools

View all →