Filmetrics
F10-AR
The Filmetrics F10-AR is designed for simple measurement of ophthalmic anti-reflection coatings. The Filmetrics F10-AR can measure hardcoat thickness with the optional UPG-F10-AR-HC software upgrade. The Filmetrics F10-AR uses a spectral reflectance method and an integrated spectrometer/light source unit.[1][2][3]
Introduced
2010
Optics
380-1050 nm[3]
What it is
How it works
The Filmetrics F10-AR uses spectral reflectance measurement. The Filmetrics F10-AR contains an integrated spectrometer and light source unit. The Filmetrics F10-AR connects to a Windows computer through a USB port. The Filmetrics F10-AR includes FILMeasure software and a CP-1-AR probe. The Filmetrics F10-AR can perform pass-fail testing of minimum, maximum, and average reflectance over user-defined wavelength ranges. The Filmetrics F10-AR uses an AutoBaseline feature that increases baseline intervals and improves accuracy relative to other fiber-probe-based reflectance measurement systems. The Filmetrics F10-AR uses a special algorithm to correct localized reflectance distortions caused by hardcoat layers.[1][4]
The Filmetrics F10-AR has a proprietary probe design that rejects backside reflections. The Filmetrics F10-AR rejects ninety eight percent of backside reflections on substrates that are one point five millimeters thick, and the probe rejects even more on thicker lenses. The Filmetrics F10-AR therefore does not require backside preparation for that use case.[1][4]
Where it fits in the process flow
The Filmetrics F10-AR is intended for automated testing of ophthalmic coatings. The Filmetrics F10-AR allows line operators and research personnel to test and record coating performance in seconds. The Filmetrics F10-AR supports go-no-go or good-bad evaluation of reflectance results against target behavior.[1][3]
Applications
The Filmetrics F10-AR measures ophthalmic anti-reflection coatings. The Filmetrics F10-AR can measure hardcoat thickness with the optional UPG-F10-AR-HC software upgrade. The optional hardcoat upgrade measures hardcoat thickness from zero point two five to fifteen micrometers. The Filmetrics F10-AR can measure hardcoat thickness even in the presence of anti-reflection layers. The Filmetrics F10-AR can also compare multiple reflectance spectra to target spectra and can quantify residual color.[1][3][2]
- Ophthalmic anti-reflection coatings
- Hardcoats
What do the numbers mean?
Wafer handling2
- Backside reflection rejection
- Rejects 98% of backside reflections on substrates 1.5mm thick, and more on thicker lenses[1]
Optics & imaging2
- Reflectance testing
- Minimum, maximum, and average reflectance can be go/no-go tested over user-defined wavelength ranges[1]
Control & software4
Configuration & options16
Vintage & configurations
Documented models & variants
| Designation | Generation | Vintage | Changes | Source |
|---|---|---|---|---|
| F10-AR-UV | — | — | Thickness range 100 nm to 15 µm; wavelength range 190 to 1100 nm. | kla.com[2] |
| F10-AR-UVX | — | — | Thickness range 100 nm to 30 µm; wavelength range 190 to 1700 nm. | kla.com[2] |
| F10-AR-EXR | — | — | Thickness range 200 nm to 30 µm; wavelength range 380 to 1700 nm. | kla.com[2] |
| F10-AR-NIR | — | — | Thickness range 500 nm to 30 µm; wavelength range 950 to 1700 nm. | kla.com[2] |
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What does the Filmetrics F10-AR measure?
The Filmetrics F10-AR measures ophthalmic anti-reflection coatings. The Filmetrics F10-AR is also designed for hardcoat thickness measurements even in the presence of anti-reflection coatings.[1][2]
Can the Filmetrics F10-AR perform pass-fail reflectance checks?
The Filmetrics F10-AR can go-no-go test minimum, maximum, and average reflectance over user-defined wavelength ranges. The Filmetrics F10-AR can also compare multiple reflectance spectra to target spectra and generate good-bad readings.[1][3]
Does the Filmetrics F10-AR require backside preparation?
The Filmetrics F10-AR does not require backside preparation. The Filmetrics F10-AR probe rejects ninety eight percent of backside reflections on substrates that are one point five millimeters thick, and the probe rejects even more on thicker lenses.[1][4]
Not publicly documented
The following facts about the F10-AR are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the F10-AR are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the F10-AR are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the F10-AR are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the F10-AR is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the F10-AR are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]web.archive.org — web.archive.orgweb.archive.org
- [2]kla.com — kla.comkla.com
- [3]gambetti.it — gambetti.itgambetti.it
- [4]F10-AR System — premier-sols.compremier-sols.com
Last updated Oct 17, 2026.